Search results

Date Relevance Most replies

  1. S

    SLCD-3 display settings, P and C parameters

    Hello, Has any one had a chance to check the actual effect of the C5 parameter? The S12S manual downloaded from BMS Battery site says the maximum adjustment is -5A, whereas the manual of the manufaturer says -50% of the controller current e.g. -10A for a 20A controller...
  2. S

    2WD (Two-Wheel Drive) FAQ

    Hello D8veh, what is the proven maximum current for a S06S with a soldered shunt mod? Thanks.
  3. S

    2WD (Two-Wheel Drive) FAQ

    D8veh, I forgot the link to the corresponding Cyclurba thread: http://cyclurba.fr/forum/156197/greencity-madrid-bi-moteur-n-a-marche-d-enfer.html?from=441&discussionID=8575&messageID=296337&rubriqueID=92&pageprec=
  4. S

    2WD (Two-Wheel Drive) FAQ

    D8evh, His S06S' does deliver 30 Amp each. The guy found out that the original shunt once modified with solder generates a lot of heat, up to the point that the solder melted away. So he changed the orignal shunt with an external shunt made of a copper wire. So it looks like when the S06S amp is...
  5. S

    2WD (Two-Wheel Drive) FAQ

    Motomech, I am curious about your test with the 12S battery and S12S controller. Any drawback with this setting? Thanks.
  6. S

    2WD (Two-Wheel Drive) FAQ

    John, it's incredile how much current the motor connecting wire and plug can withstand. With the 23Amp controlle setting, it goes up to 61 Amp at start. With a more reasonable 15 amp controller, it is 51 Amp. Has anyone experienced melting plug or wire with the Q100 and or the BPM which, I...
  7. S

    2WD (Two-Wheel Drive) FAQ

    D8veh, here is the link of the guy who rides a Q100 24v/328rpm 2wd : http://cyclurba.fr/velos/2277/greencity-madrid-bimoteur-1400w-45km-h.html Each motor is fed with 30v battery and 30 amp controller.
  8. S

    2WD (Two-Wheel Drive) FAQ

    Dear D8veh, You are right, running a Q100 at 23A requires some minimum cares. The guy I was talking earlier runs his Q100s at 30A (!), but his bike is a 2WD therefore it passes the low RPM/low efficiency zone very quickly. I am not planning to use my futur fast bike at full throttle, Max Amp all...
  9. S

    2WD (Two-Wheel Drive) FAQ

    Thank you all for your feedback. These are useful information. I am a KISS addict in every thing I do. That's why I am planning to use my two 36V batteries and get two 24V / 328 rpm motor. It should give me a fast configuration. To illustrate what I said erlier, I have simulated a Q100...
  10. S

    2WD (Two-Wheel Drive) FAQ

    Motomech, Teklektik, Thanks for your answers. Your graphical method makes perfect sense. Dividing the bike loads by two, as I did, gives the exact same results, the advantage being that you can directly read the input and output data in the table. I agree the Q100 24V/201rpm @ 36v is very...
  11. S

    2WD (Two-Wheel Drive) FAQ

    Motomech, d8veh, Hangdog98 , Thanks for your feedbacks. I am planning to use existing batteries. I have two 36V/10Ah batteries. So the choise of the batterie is already done. I will rprobably use the same motor on for the front and back, although I know that the rear wheel can get a better...
  12. S

    2WD (Two-Wheel Drive) FAQ

    Hello, I am a user of a 2WD e-bike. It's powered by 2 x Q100 36V/201rpm and 2 x 36v/14A controllers. It is perfect for my region, the Alpes. But I would like a bike equipped for much more speed, still with uphill ability. So I was thinking of 2 x Q100 24v/328rpm and 2 x 36V/23A controllers. I...
  13. S

    Best controller for bafang BPM?

    Look at the PDF file in the download tab. There 2 plugs called EABS (grey cables). I am assuming it is the regen.
  14. S

    Best controller for bafang BPM?

    Looking at the BMS Battery site, the S12S doesn't have the regen, whereas the S12H has. However in the following thread it looks like the S12S has the regen too : http://cyclurba.fr/forum/327823/sine-wave-controller.html?discussionID=12145 . To be clarified with BMS Battery.
  15. S

    The new Qute Q100H motor

    It would be interesting to know whether these extra torque and speed are are coming from a better motor efficiency or just a higher current. Thanks.
  16. S

    KU123 100V Mod: success!

    Same question: I bought a 36V / 250W ebike with a sine wave controller. I would like to get a slightly higher torque via the shunt mod. Does the shunt mod work on a sine wave controller? the controller is marked 11.5 amp and I want to push it to 14/15 amp. Thanks.
Back
Top