Search results

Date Relevance Most replies

  1. notger

    Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

    hey Madin88 what was the problem with your Adaptto PSU (? Did you use an Eaton ?) I do not own an nucular now But would be a pain if my eaton wouldnt work with my 15s (54 Volt)Pack cause i built it into the Frame and the eaton measurements just fitted perfect. So with the fatpack you charge...
  2. notger

    Nucular electronics - complete kit for ev!

    So the final 6F Controller will be coated with conformal too, right ? When will you go into Display Mold production ? greets Notger
  3. notger

    Nucular electronics - complete kit for ev!

    It for sure has to follow some kind o rythm or signals/per/seconds rule. exmpl. -> 5 fast break Singals within 2 seconds otherwise its ignored as setting-cange. AND/OR those brake signals can just be used with 0 or 0-10 km/h (so whe cops actually pull you over) Thats actually nothing new, i...
  4. notger

    Nucular electronics - complete kit for ev!

    Hi, Vasili could you make a photo with all three nucular sizes 6F, 12F, 26F in their housings and with a display to get an idea of the size differences beside each other. And how far is BMS (16s or 24s) developement or production ? Micro Nucular controller 6F is availeable in February ?
  5. notger

    Nucular electronics - complete kit for ev!

    Love an combination of the ideas 5 times brake lever signal initiates erasing of statistics and swithes to a eco mode 30km/h and 600Watts. Cops stopped me two times in the last 3 years onec the put my bike on a mobile speed testing stand lukily i hab the locked firmware from adaptto and could...
  6. notger

    GNG / CYC X1 Pro 3000w

    Finally the Chinese Version of an Torcman T-Bone http://www.t-bone.torcman.de/#xl_Torque Any ideas of the Price yet ? and when will it be released ? greets Gernot
  7. notger

    AVIAN featherweight mid drive

    As Examples http://www.chargery.com/BMS16.asp https://bmsbattery.com/bmspcm/833-smart-bms-10s13s-60a-with-blue-tooth-android-or-ios-app.html or from the E-skate community https://www.electric-skateboard.builders/t/diy-6s-to-12s-bms-with-can/2639 and probably there are more interesting...
  8. notger

    Adaptto Mini-E/Max-E Owner's Thread

    What Beast is it ? A new one or the MAX-e
  9. notger

    New "Lingbei MM28.250 torque sensor mid drive"

    So it sound you have one of these motors ? What happens if you put the bike on a bike-stand, with rear wheel in the air --> bring the pedal into vertical position -->and just push or step on the lower pedal without turning it clock or counterclockwise will the motor start spinning ? If it...
  10. notger

    New "Lingbei MM28.250 torque sensor mid drive"

    Hey Stancecoke what do you think, i know that you did lots of "surgeries" on many different kind of torque sensors. Seeing the inside of the Linbei now, i do not understand how torque should be measured at this spot. I mean i could think of that a hall-sensor measures the bend of the axle, but...
  11. notger

    Nucular electronics - complete kit for ev!

    What does that mean i tought the BBS does not even have a built in torque sensor ? it does ?
  12. notger

    New "Lingbei MM28.250 torque sensor mid drive"

    I mean not taking Voltage spikes into count it should actually work 15X 4,1 Volt (ideal 18650 charge-limit) = 61,5 Volts But sure the Battery gauge will not show the right state of charge it the dispaly can just be set to 14s But ! would be important to know what over-voltage Protevtion value...
  13. notger

    Eaton APR48-3G 1.8kW Light Compact Charger PSU

    How low could you set the output voltage minimum ? (with both mods pot and programmer ?) greets Notger
  14. notger

    New "Lingbei MM28.250 torque sensor mid drive"

    Did anyone actually try to connect the lingbei with bafangs software ? or is it just a guess. I mean sure the torque option will not appear but maybe all the other options are changeable ?
  15. notger

    New "Lingbei MM28.250 torque sensor mid drive"

    I think i remember reading about Bafang BBS Users trying to go with 15s Liion = fully charges 63 Volts. What i remember is that the Bafang configuration software would not allow anything above 62 Volts and controller would show up an error...
  16. notger

    Adaptto Mini-E/Max-E Owner's Thread

    I did,..... but there is no "plug and ride" solution Either you use a CA3 between BB-Torque Sensor and Adaptto-Throttle-In (witch would probably be the most expensive but advanced method) or: the German "Forumscontroller"...
  17. notger

    Dave's 80:1 RC mid drive kit build log

    @tangentdave a short "side-question" --> wahts teh overall width of the Drive (from outer motor-case-lid to the Freewheel ? ) Greets Notger
  18. notger

    Adaptto Mini-E/Max-E Owner's Thread

    Hi, looking for all Mini FW's actually (also to feels save if Adaptto would ever Quit their Business) - Password protected - Eco mode works only with PAS (with throttle disabled) --> to maybe make a legal Bike someday - Password Protected - both throttle and PAS works at the same time - the...
  19. notger

    Adaptto Mini-E/Max-E Owner's Thread

    Are those Firmwares availeable in teh most recent Version ? and where to get them From (in my case for my two Minis) thanks --> notger
  20. notger

    New Generations of BB Torque Sensors (Bafang and Sempu)

    It does, but not sure if its supported by the CA as pre-controller ? Probably it has its own "intelligence" inside ?
  21. notger

    New Generations of BB Torque Sensors (Bafang and Sempu)

    Does anyone know this multi-tooth standard that Bafang is using on its chainring-spiders ? (if it is any standard)
  22. notger

    New Generations of BB Torque Sensors (Bafang and Sempu)

    exactly my idea, just not sure, if the 1,37" / 35,8mm thread would fit on the...... and another Problem could be that the Sqare tapered crank would not, or very tightly fit on the crank ?? Many coulds,....Probably goot to test it. What do you think about the Bfang ? or any experiences ?
  23. notger

    New Generations of BB Torque Sensors (Bafang and Sempu)

    And now, ontop of that, another Motivation would be to create a custom mi-drive-freewheel-bb-torque-sensor for my several mid-drive options with freewheels. This could look like this.: adding a.: to this Spot (lets call it chainring-spider-mount).: any ideas on that ??
  24. notger

    New Generations of BB Torque Sensors (Bafang and Sempu)

    Hi, I'd like to make people aware of two new BB - torque Senors witch look really interesting. One is the "New Generation Sempu T4" measuring torque on both sides cause measuring the chainring-force. ---------- https://www.ebikes.ca/documents/Sempu_Sensor_Manual_2018.pdf...
  25. notger

    New "Lingbei MM28.250 torque sensor mid drive"

    Ok, shit, I'm getting really interested now. It would mean, the Controller does not controll Wattage, rather than top speed nd probably max battery Amps. So if the will be a customization software to get more torquy controll, i will probably also order one. Where did you get yours ferom ?
Back
Top