Search results

Date Relevance Most replies

  1. T

    Luna Cycle X-1 Enduro FS (Bafang M600 / Dengfu M09)

    "On a more positive note, after comparing my video from 2 days ago I would say it is getting quieter as it breaks in. Grinding noise seems to be less." What would concern me if the grinding noise is lessened, were those metal parts creating the grinding noise? Is there now metal dust or...
  2. T

    Bafang BBS02 chain ring with improved off-set?

    the BBSO2 is limited to how much offset a chainring can have. The 42 lekkie leaves only about 4-5mm before it would hit the motor. The eclipse does not fit the BBSO2. A chainring with slightly more offset would only gain about 1 tooth of improved chainline, but for many BBSO2 owners any...
  3. T

    GNG / CYC X1 Pro 3000w

    Electron Cycles is working on the X1 with the ASI BAC 800. He seems to be very happy with it at 20S. Look forward to his final assessment in the near future. Lightning Rods has an adapter that can be used with 219 kart gears as primary. Should make experimenting with drive gears cheaper. He also...
  4. T

    GNG / CYC X1 Pro 3000w

    important measurements for the chain drive. You should have a good idea of fit and make your plans with spacers if needed. https://www.facebook.com/photo.php?fbid=2473403469342531&set=p.2473403469342531&type=3&theater
  5. T

    DIY Fix for BBS02/BBSHD Pedal/Throttle Issue

    Can the black and grey wire be accessed outside of the motor for the Domino throttle solution? If so where would be the best spot. sorry if this is a foolish question. i am electrically challenged, but follow instructions fairly well.
  6. T

    GNG / CYC X1 Pro 3000w

    Was it determined if the controller is 60V nominal or 60V actual?
  7. T

    Grin Phase Runner / CA3 and BBSHD

    You changed out the JSTs on the Phaserunner to higo compatible with the BBSHD?. I was going to change the HD to JSTs, but Higo on the phaserunner would be much better. Where did you get your Higos? Could you share a parts list of what you you needed and used? Thanks
  8. T

    Grin Phase Runner / CA3 and BBSHD

    Christian, thanks for posting the links and the pics. Waiting in some IWISS JST crimpers and I will be taking the dive.
  9. T

    Grin Phase Runner / CA3 and BBSHD

    My motor is older and has no thermistor wire. what thermistor wire did you use and where on the stator did you install it. thanks
  10. T

    BBSHD phase runner crank gear choice?

    I have been reading about the BBSHD/phase runner combo. Some have gone with a 30T crank and another poster went with a 42T crank with a 42 rear sprocket. That is a huge difference in crank selection. Is that to get a higher top speed? What would be the advantages and/or disadvantages of each...
  11. T

    Grin Phase Runner / CA3 and BBSHD

    which iwiss crimpers for the jst's
  12. T

    Grin Phase Runner / CA3 and BBSHD

    Will this connector pack do the job? What would the best thermo paste to get? Again, thanks for your help here. You have given me the confidence or false confidence to move ahead...
  13. T

    Grin Phase Runner / CA3 and BBSHD

    Aerialpixels thankyou for sharing all your work with the phaserunner.
  14. T

    Grin Phase Runner / CA3 and BBSHD

    How much later in the year?
  15. T

    Grin Phase Runner / CA3 and BBSHD

    The CA3 with Higos is on his website.
  16. T

    New "TSDZ2 Torque Sensor Central Motor"

    How long does it take the TSDZ2 to calibrate the torque sensing after turning the power on?
  17. T

    New "TSDZ2 Torque Sensor Central Motor"

    Is the difference between the 48V 500W and 52V 750W the controller only? i have the 48V and that would be a cheap upgrade since I already have 52v batteries for a bafang
  18. T

    Grin Phase Runner / CA3 and BBSHD

    Thanks for sharing. I was wondering if you tried field weakening at 52 volts and your results.
  19. T

    Grin Phase Runner / CA3 and BBSHD

    Thanks for updating. It is very much appreciated. Did you run at 52V and can you tell us about your experience?
  20. T

    Grin Phase Runner / CA3 and BBSHD

    Thank you for your efforts Reinhard. Sometimes as a consumer i feel neglected. :lol:
  21. T

    is there any way to fit a Grin Phaserunner inside a BBSHD?

    Irun my BBSHD at 60 amps 52V. You can change the PAS settings to reduce cadence to your liking. You can tune to the power and cadence you want in every level of PAS. The phaserunner would be interesting even at 52V. I would turn down amps to 45. And use field weakening to reduce back emf and...
  22. T

    Grin Phase Runner / CA3 and BBSHD

    Thanks for posting. The ball is rolling for a good BBSHD solution.
  23. T

    Grin Phase Runner / CA3 and BBSHD

    yes! Yes! On the list now please!
  24. T

    Grin Phase Runner / CA3 and BBSHD

    Going to order the CA3 and phaserunner for use with the BBSHD. Will some one please post a list of extra connectors and wiring that will be needed? I wish Grin would just make a kit Kit for the BBSHD.
  25. T

    is there any way to fit a Grin Phaserunner inside a BBSHD?

    i think heat might become an issue for the controller housed in with the motor.
Back
Top