Search results

Date Relevance Most replies

  1. M

    An alternative, "modern" display /SOMEWHAT LIKE/ cycle analyst

    Thanks, I really appreciate the comment.
  2. M

    An alternative, "modern" display /SOMEWHAT LIKE/ cycle analyst

    It's one approach to hope someone else will make what you want, or you can make what you want. I'm not trying to sell anyone on my approach, only offering to share it if someone wants to customize their bike computer the way they want. I don't know if Grin will implement a "virtual wheelie bar...
  3. M

    Qulbix Inspired Extreme E-Bike 100km/h

    Thanks, I do love working on EVs. I have the controller settings maxed out. It's a Kelly KLS-S controller, 300A phase current limit. I put all delays at minimum (throttle/brake delay), cranked up the loop error so you can lift the front wheel, and have a separate input for regen braking (thumb...
  4. M

    An alternative, "modern" display /SOMEWHAT LIKE/ cycle analyst

    This is a different, lengthy, costly and somewhat difficult approach, but I decided I didn't like the the display on cycle analyst so I built an alternative. I called it the pyEC for python bike computer. I use a Nextion HMI for the display so you can customize it anyway you like. I don't have...
  5. M

    Quality e-bike throttle?

    I use a traditional throttle with a cable that then connects to a small box that converts the cable to Hall output. You can then set the postions, max/min with the cable. I think surron uses this system or something similar. I recall learning about it in a surron review vid. Anyway this allows...
  6. M

    Quality e-bike throttle?

    I use a traditional throttle with a cable that then connects to a small box that converts the cable to Hall output. You can then set the postions, max/min with the cable. I think surron uses this system or something similar. I recall learning about it in a surron review vid. Anyway this allows...
  7. M

    Qulbix Inspired Extreme E-Bike 100km/h

    This is my lovingly crafted extreme E-bike. It was based off a Qulbix style frame and heavily modified to both suit my needs and correct a few weak points. I’ve been tweaking and revising this bike for over 2 years and ride it everyday as my main transportation. The stats: Motor: QS 3000W 205...
  8. M

    Beware of FerroFluid!

    I tested the fluid on its own today and it isn't conductive. I also looked at the inside of a side cover of a QS205 and it has lots of ridges in it. This sounds to me a lot less like a problem with ferro fluid and more a problem with motor wiring. I even soaked some up in a paper towel and that...
  9. M

    Beware of FerroFluid!

    I've had success with Statoraid and my QS205 motor. I run a KLS controller and in well over a year, haven't had any issues. It keeps the temp lower on my motor than without it. I have some left over, I can measure the conductivity, though it shouldn't be getting away from the magnets. I used to...
Back
Top