Search results

Date Relevance Most replies

  1. I

    BionX 48V battery not responding but cells are ok

    I think it is wired to the battery via a special pin that gives current only when console sends the signal but as there is no communication anymore between the console and the Battery it does not work anymore. Here a pic of my ongoing Battery replacement It will have an extra switch on it...
  2. I

    BionX 48V battery not responding but cells are ok

    Ok it works!!!! I wasn't pushing enough on the pedals to start the motor. Fun Fact, the lights do not work or is there a light sensor that holds the lights from shining even if turned on? Diagnostic Mode gives Error 00 30 26 which is normal: >> 26 = No communication between Console and...
  3. I

    BionX 48V battery not responding but cells are ok

    How do you check the diagnostics? found it: https://electricbikereview.com/forums/threads/how-to-get-access-to-your-bionx-console-code-menu-codelist-included.519/ I have G2 console
  4. I

    BionX 48V battery not responding but cells are ok

    Hi again, Here the picture of the bike and my test battery, for the moment the display goes on but the motor does not start. Any ideas?
  5. I

    BionX 48V battery not responding but cells are ok

    Hi, I am currently doing this conversion for a friend with a busted bionx Battery, I will keep you in touch if it works.
  6. I

    Gadgets on your eBike that you couldn't live without

    Touch sensitive gloves!!!!!! This winter I was very happy buying new gloves because my hands were freezing ....until I had to use my phone (with osmand) Damn! 35€ trashed. I tried sewing conductive wire to my finger but it does not work very well....or I am bad at sewing :lol: So if you buy...
  7. I

    Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

    Hi, I just updated my nucular display and controller, it went ok, some parameters had to be set up manually like the FOC mode for the motor and the wheel circumference but other than that I am pretty happy. One question: My bike is currently configured with ebrakes and I wanted to know if...
  8. I

    E-S LMX 64 Bike Owners

    Just came back from my 1st test with the battery (even if its freezing 0°C): Eveything's great! I have a steep hill for testing and with the stock battery to stay around 40Amps the motor had to slow down or cutoff (depending on the parameters) now it's withholding 70Amps without issues. I am...
  9. I

    E-S LMX 64 Bike Owners

    Almost ready! - As you can see with 2P more the battery is comparable in size with the original one. - I will need to add padding to avoid it to move - When I charged it I saw that the stock lmx charger charges only until 90% (which is good and Bad) which explains that I was in need for...
  10. I

    E-S LMX 64 Bike Owners

    Good times! my BMS and nickel strips arrived today, I can continue my battery
  11. I

    E-S LMX 64 Bike Owners

    Hi, I have ran out of nickel strips so in the meantime I will have a go at a nucular update (display + controller) Can someone share his settings with a recent version of nucular? https://nucular.tech/firmware last version: - Display: 0.60b (mine is 0.57b) - Controller 0.7.18 (mine: 0.7.9)...
  12. I

    E-S LMX 64 Bike Owners

    Hi folks, good stuff has arrived in the mail and I started building Half a battery: Good news, it seems for my 14s7P Project it won't be necessary to make a 2 part battery, just make it like a parallelogram and you can slide it in the bike (still other tests to make) Maybe this...
  13. I

    E-S LMX 64 Bike Owners

    Hi There, Finally winter is here and so the time for me to go back to my battery project for my LMX64 M frame. I finally decided to go for a 14s7P with Sanyo cells (10A 3350mAh) The main reason is that with my supplied 14s5P with Samsung 35E cells (3500mAh / 8A), I have only 40A continuous...
  14. I

    bluetooth BMS?

    found it here: https://www.aliexpress.com/item/4001223379820.html
  15. I

    E-S LMX 64 Bike Owners

    How can we tell if we have a 30mm or 40mm stator from the outside?
  16. I

    E-S LMX 64 Bike Owners

    Indeed I have a M frame.
  17. I

    E-S LMX 64 Bike Owners

    Some additional infos for the Battery project. As you can see the Electroride 14s7P Battery is way smaller than the EM3EV 14s7P but still IMHO it would not slide in even with the motor off.
  18. I

    E-S LMX 64 Bike Owners

    50km/h on a stock LMX64T - 45km/h on a LMX64H on pedal assist only.....a bit less because you cannot keep up with the stock chainring (but it really depends on the way your PAS is set up)
  19. I

    E-S LMX 64 Bike Owners

    After looking again and making a new cardboard mockup, I think that even with the motor out it would be impossible to slide the battery in. Next step: trying the Electroride one.
  20. I

    E-S LMX 64 Bike Owners

    Exactly what I was thinking about too...I will try But can they ship to EU?
  21. I

    E-S LMX 64 Bike Owners

    Interesting thought, I guess I will try this Winter
  22. I

    E-S LMX 64 Bike Owners

    Hi folks, I made a paper mockup of this pack: https://em3ev.com/shop/50v-14s7p-rectangle-battery-pack/ Dimensions: 81mm thick. 324mm long, 140mm wide. and it fits.....kinda.... but you cannot install it due to the side panels of the battery box of the LMX. with some rework if we coud split...
  23. I

    E-S LMX 64 Bike Owners

    Just found out why I don't get the whole 17Ah from my battery (which is the one from em3ev), it's because the charger from LMX only charges up to 58V and not 58.8V In one hand it's good for battery life but on the other hand you loose some capacity. Next up is to see if the 14S6P and 14S7P...
  24. I

    E-S LMX 64 Bike Owners

    Yesterday I made a 25Km ride (nice hard MTB Trail) and battery was completely drained after it (and I do pedal) after a while the Nucular controller was reducing power to avoid the under voltage limit I guess and so I rode at 30km/h on hills. I think It would really benefit of a 14S6P but I...
  25. I

    E-S LMX 64 Bike Owners

    First thank you for all the good advice on the mud guards, I decide to go for: Topeak Defender XC1 Front Fender (due to no clearance under fork) and a medium muhugger for the rear Yesterday I tested my LMX64 on a steep hill and I definitely have less power than on my LMX81, bike was...
Back
Top