Search results

Date Relevance Most replies

  1. A

    TOSEVEN DM01/02 T24 display manual

    While on the trip screen press "power" and "down" for about 3 seconds. Consumption I don't know.
  2. A

    ToSeven DM01 Set Up Questions

    In think I understand what you are saying...makes sense to me. I will to put together a list of features/variables and maybe you can try to answer how tweaking what variable influences the performance in what way... Maybe this will lead to the desired result ..TIA anyway!
  3. A

    ToSeven DM01 Set Up Questions

    You may be right...in that case I am "lost" because I needed to get the filter down to zero in order to get continuous and smooth support under "normal" circumstances. Default is 2 (max is 10) and there already it was annoying me that support would stop when I stopped pedalling and only picked...
  4. A

    ToSeven DM01 Set Up Questions

    I have changed a bit the values for the support levels.. percentage, speed, whatever. and increased the number from 5 to 8...I am not even sure that This did a big effect or not...no idea. the one thing that did something for sure was to change the torque filter value from 2 to 0 . This helped...
  5. A

    ToSeven DM01 Set Up Questions

    I never had the ECS version, started right away with M1/M2, using only M1 (torque sensing) and I am 80-90% happy. Instant power assist and instant stop. No problem
  6. A

    TOSEVEN DM01/02 T24 display manual

    Hi, I may be able to help. It can get a bit complicated in written. Speaking it would probably be very simple. So you switch on the display. Actually you should be ready to go. If you push the up arrow you should see that the 1 goes up to 5. These are the default support levels. Obviously you...
  7. A

    ToSeven DM01 Set Up Questions

    Very kind of you... I wonder if no one here has successfully attempted to make an update...John in the video obviously has...
  8. A

    ToSeven DM01 Set Up Questions

    https://to7motor.com/progam-updating-instructions This is what I am referring to... Not completely out of the blue....haha.
  9. A

    ToSeven DM01 Set Up Questions

    So I found the com port...assigned it to uart...still getting I/O error message...
  10. A

    ToSeven DM01 Set Up Questions

    Thanks very much! I am stuck here: he knows at what com Port he is (com 3) . How does he know? I don't see anything...and then in am getting com Port error 123 and I click on uart...and there comes a list of possible com ports...I have selected a few.. none of the worked ..where is my mistake...
  11. A

    ToSeven DM01 Set Up Questions

    I am having a problem... Katherine from To7 wants me to update the firmware..I have no choice because I will not get any further support if I don't follow her instructions.. Problem: I have no clue how to do it....I have downloaded the flash tool, I have connected the cable to USB and to the...
  12. A

    ToSeven DM01 Set Up Questions

    Interesting...I cannot see anything here in Germany...I was not aware that AliExpress offers are not available everywhere. Never mind, I have mine anyway...
  13. A

    ToSeven DM01 Set Up Questions

    I don't see a product there... You must have bought the last one ...(or the only one...?)
  14. A

    TOSEVEN DM01/02 T24 display manual

    this is why I am getting more and more frustrated....the product has alot of potential...but they are really lacking the absolute minimum of documentation.... I Could post her latest reply.... Full of contradictions and bs.... Are Chinese people so much brighter? You throw a product at them...
  15. A

    TOSEVEN DM01/02 T24 display manual

    I still have yet to figure out the most simple things here...this is completely crazy .. one does not even know how to reset the "trip" value to zero.... There is no reading for cadence....real pity .. And what do all the signs and curves on the display mean? W in the left lower corner...
  16. A

    ToSeven DM01 Set Up Questions

    Oh...that is interesting! I don't know what to say...what does "better" mean? Maybe something else to everyone? I cannot comment on this since I got it this way ...If I knew what the specific differences in performance are according to the unhappy users, then I would have something to hold on...
  17. A

    ToSeven DM01 Set Up Questions

    I have the cable, but I am quite happy the way it is with respect to M1 (and M2) I had the tsdz2 in a few versions before, with casainho OSF. There where no eco etc modes there either, I personally like it this way What I am really missing are good instructions with explanations ....
  18. A

    ToSeven DM01 Set Up Questions

    I jumped on the DM01 wagon....i am not sure why I did it, but I know that something in my brain is defective which makes me do questionable things from time to time.. I bought it directly from the factory thru the lovely and very polite Katherine. I have been invading her with questions over...
  19. A

    New "TSDZ2 Torque Sensor Central Motor"

    Hello, I have been away for a while.. I am now facing a problem with my new tsdz2 b which I replaced the older tsdz2 with. I flashed the 1.0.0 firmware... Everything is smooth until I need to climb up a hill...when I have to reduce cadence, e.g. when going around a corner, the support by the...
  20. A

    New "TSDZ2 Torque Sensor Central Motor"

    Many thanks, I will check this out!
  21. A

    New "TSDZ2 Torque Sensor Central Motor"

    I almost thought so, but I was wondering how that should be possible to do with a DC battery. Impressive...for me at least..haha. Anyhow: thanks for the info!
  22. A

    New "TSDZ2 Torque Sensor Central Motor"

    I apologize for the following question:.. The actual motor has 3 thick wires blue, green and yellow. Can the battery be connected to (which) 2 of these in order to see if the motor works or if it is broken? My intention would be to simply.make the motor run.b applying voltage directly to it to...
  23. A

    New "TSDZ2 Torque Sensor Central Motor"

    Hi there, today i got "error 3 torque".... i can imagine it has to do with bad weather yesterday...maybe some humidity got somewhere and damaged something...who knows... display/engine start normal but as soon as pressure on the pedal increases a bit, support stops and i get this error code...
  24. A

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    the old controller must have died somehow...ST-LINK was not able to detect it as a device. I have swapped controllers now and everything seems to be fine again. at least i am not getting an error message so far ...:-) thanks for your help, gentlemen!
  25. A

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    . I remember also other people reporting a similar problem to yours. In their case it was due to a corruption of the option bytes. The Casainho's software is normally setting them but as it was discussed here may be not all of them. The solution is to read the option bytes from a working...
Back
Top