Search results

Date Relevance Most replies

  1. N

    Motor strong shaking over 2300 RPM (Problem solved)

    Hello, I bought a cheap 3000 W 72v Motor with not much Information about it. Its even hard to find the exact Model Name or Manufacturer. But i found a Topic in this forum with a similar motor (https://endless-sphere.com/forums/viewtopic.php?f=30&t=100331) I try to test the Motor an a System...
  2. N

    Kelly KLS Precharge

    Aha jemand aus Österreich wie klein die Welt b.z.w das Internet doch manchmal ist :D If the spark on Pin 7 is normal i can live with that i think i build a switch in the wire so its easy to turn the Controller on and off and as a long time solution i hope i find a connector like the XT 90...
  3. N

    Kelly KLS Precharge

    Thank you for your help i tried it and it is working more bad than good but nothing is broken and im happy about that :D I disconnected Pin 7 (PWR) and the Ca than i connected B- and the Precharge Resistor and you were right it didnt get hot. So i decide to connect B+ and perfect i cant hear a...
  4. N

    Kelly KLS Precharge

    So the problem is that the Controller and Cycle Analyst are on ? I thought in that direction because i read its a 1.000 kOhm 10 Watt Precharge Resistor and if the Controller and CA need only 5 Watts each there is no energy left to charge the capacitors ? I try it without the CA in the hope that...
  5. N

    Kelly KLS Precharge

    Hello, I have this system Cycle Analyst V3, Mxus 3k V3 Motor, KLS7218S Controller and a 72V 26,1 AH battery for the wiring i used this picture from teklektik the differences i use KLS not KLB from Kelly i use this Shunt and i dont have a switch and a Main contaktor. This is because i have the...
Back
Top