Search results

Date Relevance Most replies

  1. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    If you are from Russia, I can share the program for APT 96600 settings MOTOR. For some reason, my email does not send messages abroad.
  2. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Обычный RS кабель, а от контроллера к этому кабелю я спаял сам
  3. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    This is an inexpensive controller that allows you to accelerate my bike at a speed of 140 kilometers per hour. If I give more speed, the BMS shuts off the battery, and everything shuts down because of it.
  4. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    4 mode this is normal. 5 mode is boost. But I do not know economical. After the new firmware is in economy mode, the speed fell. But the overall speed and dynamics remained the same. Even feels a little increased.
  5. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    And how to increase the speed in the economy mode?
  6. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Larsb: Answer APT 96600 withstand 250a battery current?
  7. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    If someone does not report it I will send again.
  8. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Не могу прикрепить файл.
  9. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    I can mail the files. It does not get spread.
  10. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    This firmware is only for ymotor motor.
  11. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Gave me the manufacturer of the wheel firmware for the controller APT 96600, and a program for firmware. Now the bike rides just fine without disconnections. I'm happy.
  12. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    It felt like he was living in water.Before installing the cover promazh sealant. Everything will be OK.
  13. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Today I tried to change the battery current, but the error still turns off the controller. I don't know what to do.
  14. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    I tried -120,-90, degrees, and so on, the error POPs up at any position. And it's the same all the time. But optimal settings with those that are now installed.
  15. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Today I tried to change the settings of wheel motor degrees of timing but the problem is not resolved. Looking for a solution to the problem further.
  16. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    I tried changing the hall sensors, and the degrees. When changing degrees by 60, the wheel turns in the opposite direction, while much softer and without extraneous sounds. But I think its spinning in the opposite direction?At the same time, the speeds do not work, as if the boost mode is...
  17. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    I tried to set the settings for the QS engine, it seemed to me that the work became smoother, but the controller is still off.
  18. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    It never worked right. The phase wires are screwed tight, I checked. I haven't tried the hall sensors. Need to disassemble the bike
  19. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    https://www.youtube.com/watch?v=k2E9PLx92V8&t=117s This is my motorcycle.
  20. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    I go about 5-10 minutes normally, then there is a shutdown. And the shutdown begins to occur frequently and chaotically. And also at different throttle positions. And at different speed modes. Eco-D, Boost. The controller is warm, and I thought it was overheating, but the computer shows a...
  21. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Well, this is a mistake
  22. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    I currently have these settings installed
  23. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Вот мои текущие настройки :D
  24. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Controller Over iac error: means: The controller is over current. But that's the problem and how to treat? What overload can occur, and most importantly from what?
  25. S

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    колесо другое, ширина покрышки 200 мм. соответственно обод и внутренности другие.
Back
Top