Search results

Date Relevance Most replies

  1. B

    No acceleration

    Thanks so much.
  2. B

    No acceleration

    Finally I found the problem with the scooter. One of the hall sensor’s in the hub is not working. I opened the hub and found a frayed wire and a crusty hall sensor. Now where is a good place to purchase sensor. The number on it is 41F647. T.I.A.
  3. B

    No acceleration

    Thanks
  4. B

    No acceleration

    Tested the batteries before charge. 39.84 volts. Charged for 24 hours test 40.34. I weigh 300 lbs. work great for 6 months. I called tech guy he said batteries are bad, so I replaced all 3. Still not working. Check al connections 3 times. Pushed and pulled each individual wire. I can hold the...
  5. B

    No acceleration

    Thanks. Ok checked all connections all good. So I did some more voltage checking. The throttle red wire 5 v white wire ground, blue wire 3.7 volts. So unplugged throttle checked voltage from controller. Have 5 volts at the red wire and 5 v at blue wire. Do I have a bad throttle ?
  6. B

    No acceleration

    Yes that’s the one I have. I will check connections. Thanks
  7. B

    No acceleration

    Yes bought it new. Worked great 6 months. It’s a trike. Name zoome3. 36 volt 350 watt hub motor. Has new batteries. I can hold the wheel with my hand all it does is clicking noise.
  8. B

    No acceleration

    The trike is a zoome3. 36 volt 350 watt hub motor . Has new batteries. All it does is chugging, clicking, will not go with a load. Wheel spins without load. I can hold the wheel with my hand and all it does is clicks.
  9. B

    No acceleration

    Bike will not move under load. Wheel turn freely with no load. I am stumped. Check hall sensor in hub ,good check sensor in throttle good. Just chugging
Back
Top