Search results

  1. K

    Sur-Ron Battery upgrade

    I don't want to mislead you, I saw in a screen installation video a warning not to reverse it since it can damage the controller, but now I just found this on google: https://electronics.stackexchange.com/questions/262843/is-it-ok-that-i-accidentally-swapped-tx-and-rx-on-a-uart-bus So hopefully...
  2. K

    Sur-Ron Battery upgrade

    If you did rx-rx tx-tx you may have damaged the controller
  3. K

    Sur-Ron Battery upgrade

    I need to know about this one specifically as it's available locally
  4. K

    Sur-Ron Battery upgrade

    https://www.aliexpress.com/item/32273550144.html will this work for pc bacdoor connection? :es: :es: :es:
  5. K

    BMS identification

    Can anyone tell what's the brand/model of this BMS? If it helps, it's for a 20S8P 80A setup Thanks.
  6. K

    Why 60v batteries aren't labeled as 57.6V(3.6*16) ?

    :bolt: thanks for the answers everybody!
  7. K

    Why 60v batteries aren't labeled as 57.6V(3.6*16) ?

    I wanted to compare two batteries, 60v vs 72v by comparing their Wh, but I noticed that with 72v/20s it's 3.6*20=72v, unlike the 60v>3.6*16=57.6v .. so what's the right way to compare the Wh between 72v/20ah and 60v/20ah batteries, should it be 60v*20ah or 57.6v*20ah?
  8. K

    looking to buy new or used nucular 6f or 12f with display

    By ready to connect I meant that I won't need any special additions in terms of wiring/firmware/special display connector.. battery/motor connectors are not an issue Sorry, I didn't notice that forum, if needed I'll remove this post
  9. K

    looking to buy new or used nucular 6f or 12f with display

    New or used, but in operating condition without any issues -Ready to be connected and used -Must have English menu Thanks :bigthumb:
  10. K

    Sur-Ron Battery upgrade

    Thanks a lot!
  11. K

    ASI BAC 855 peak battery current

    Thanks! but there's conflicting information from their own website(it also says 65A peak in other section) and cyc support claiming it's 90A peak battery current maybe it's only it's a configuration limit that they sell it with? A week ago I emailed ASI about it but received no answer to this day
  12. K

    ASI BAC 855 peak battery current

    Hi, In the official manual it specifies 90A peak phase current, but nowhere the peak current it can draw from the battery, maybe you know?? Thanks in advance :bigthumb:
  13. K

    Sur-Ron Battery upgrade

    I know, that's why I'm asking about the max current of the controller but it's a mystery :D
  14. K

    Sur-Ron Battery upgrade

    Hi, I have a small question about the 855, The manual specifies 90A peak "phase current", but what is the peak battery current? I need to know the limit so I'll pick a strong enough battery to use it for max settings Thanks
  15. K

    Where can I get the type of xt60 connectors that don't melt (fake/real?)

    I knowc about this method and applied it successfully, but connectors that melt so easily shouldn't be used and produced Thanks but they don't ship to my country People are complaining about honnyking's "new xt model" amazon defitely sells lower grade/fake xt60, read the 1 star reviews (and...
  16. K

    Where can I get the type of xt60 connectors that don't melt (fake/real?)

    So I have 2 types of xt60, with and without cable covers from aliexpress, the seller told me they're not fake but who knows maybe it's an "upgraded" material :lol: .. This guy in the video says that the older ones he got are way more heat resistant to the extent that he can keep the iron on the...
  17. K

    Ebike li-ion fast charger weird result

    so I have an ebike with a 60v 26ah li ion battery a 5a charger Today after riding till the ebike turned off, it showed both on the lcd(just before it turned off) and multimeter a 51.4 voltage.. I charged it just for 20 minutes and it had increased all the way up to 55.3V ! if I calculated it...
  18. K

    Is there a difference between a same wattage 48v to 60v motor?

    wow 60v to 115v is a massive jump, if that's the case I'll keep the current motor Thanks! I appriciate your support!
  19. K

    Is there a difference between a same wattage 48v to 60v motor?

    Will there be a performance/heating/battery consumption difference if I'll upgrade my bldc hub motor from a 1000W 48V to a 1000W 60V, while still using the same 60v battery and 60v controller ? Is there even any structural difference between same wattage motors with different voltages? Thanks...
  20. K

    SW900 parameter query

    did you figure out what's p00 for?
  21. K

    GT981/SW900 LCD|what's P00/P0 for? brightness too low

    My lcd's model is gt981, but looks exactly like this, including the buttons, I also matched it succefull with 2 different sw900 supporting controllers All the P settings look the same as in the pdf, except P0/p00, can be set to 0-20 P05 which allows me to havr gear 0*, and 3/5/9* gears (sw900...
  22. K

    SW900 / SW-LCD controller compatibility

    Thanks for the warning! I thought I'll just connect it and hope for good :shock: *update* I just checked and the 5 pin connector colors on my "sw900/gt981" match the sw-lcd exactly https://i.imgur.com/DPhGbEU.png The controller I wanna buy is made by greentime, my "sw900" lcd has "gt981"...
  23. K

    SW900 / SW-LCD controller compatibility

    I already have a spare sw900 LCD, would it be compatible with a controller that supports SW-LCD ? they both look very similar altough the 900 look a bit wider Thanks
  24. K

    mt60 amass connector rated current

    :thumb: :bigthumb: :bigthumb: I have a 35A max current controller, after a 30km ride the connector isn't hot at all, about 104F/40C degrees, so far it's perfect :D , unlike the common bullet terminals I had before
  25. K

    mt60 amass connector rated current

    I checked the specs of amass mt60 on different websites and the "rated current" on one site it's 30A, and on other 45A.. which one is it? Also I'm not sure if it's rated current per 1/3 poles(bullet/wire), or for the entire collector combined, I guess that it's per pole but please say if you...
Back
Top