Search results

Date Relevance Most replies

  1. M

    New "TSDZ2 Torque Sensor Central Motor"

    Thanks I'll have to look into it, is that removed via circlip?
  2. M

    New "TSDZ2 Torque Sensor Central Motor"

    Thanks for the response, could the bearing that the end of the motor shaft fits into be worn? Is there a better bearing I can replace it with?
  3. M

    New "TSDZ2 Torque Sensor Central Motor"

    Anyone had a brass gear shred to pieces? I was out for a ride yesterday and it became very difficult to pedal under assist and felt like I was fighting with the motor. Took the motor apart and took the brass gear out and this is what it looked like, the housing had load of brass "glitter" in it...
  4. M

    New "TSDZ2 Torque Sensor Central Motor"

    Yeah I'm going to start doing that, what I meant was can I put grease between the outer of the bearing and inner of the motor casing?
  5. M

    New "TSDZ2 Torque Sensor Central Motor"

    thanks figures such a thing would exist lol. Any tips on future bearings not seizing up? copper grease good?
  6. M

    New "TSDZ2 Torque Sensor Central Motor"

    Thanks I found them online too, just need to be sure of measurements. Removing the torque sensor from my current bike was extremely tough. Nearly tore apart my rubber mallet doing it. The sensor is in worse shape then my other one but the damaged bearing is stuck in the tube. How would I go...
  7. M

    New "TSDZ2 Torque Sensor Central Motor"

    So I sent the pic of broken torque sensor to ebird store and they asked for a pic of the motor on the bike in relation to the chainstays. I sent them the pic and they say the motor is too close to the frame and I should increase the gap by putting a washer on or bending the frame. Obviously I'm...
  8. M

    New "TSDZ2 Torque Sensor Central Motor"

    It came with the wavy black washer between the circlip and bearing. Only one on the the non-drive side
  9. M

    New "TSDZ2 Torque Sensor Central Motor"

    This is actually out of my old motor, I haven't opened up my current broken one but I'm assuming I'll find the same thing
  10. M

    New "TSDZ2 Torque Sensor Central Motor"

    So I decided to take the torque sensor out of my old motor to see how it removes and what it looks like. After taking off the big gear I used a soft hammer on the axle to persuade the torque sensor out. This is what I found
  11. M

    New "TSDZ2 Torque Sensor Central Motor"

    My motor didn't come with gold washers, neither did my first one. I take it the gold washers are only in the older models with straight cut gears?
  12. M

    New "TSDZ2 Torque Sensor Central Motor"

    Thank you, I found this place in the UK that sells them? https://www.accu.co.uk/en/704-shim-washers#elasticsearch_id_feature_607864=607864_758&elasticsearch_id_feature_607865=607865_699&elasticsearch_id_feature_607918=607918_125&id_elasticsearch_category=704&orderby=ranking&orderway=asc Could...
  13. M

    New "TSDZ2 Torque Sensor Central Motor"

    Thank you for the link, went on pswpower website too and the found the axle parts you speak of. The video showing the problem doesn't exist anymore however. Looked at the manual and it seems confusing. When I took apart the axle on my motor there is a rubber cover, a circlip, a wavy piece of...
  14. M

    New "TSDZ2 Torque Sensor Central Motor"

    I've ordered a new torque sensor, is there a guide to install it? One of the posts mentions lateral force due to bad chain line, maybe this is my problem too. I only get good chain line through the smaller cogs on the cassette but lately I have been favouring my own power and using the bigger...
  15. M

    New "TSDZ2 Torque Sensor Central Motor"

    Opened the motor and it turns out had put the 5 pin connector in the wrong way round which is strange since I thought it went in only one way. Put it back together and the walk mode now works but not still not getting any assistance. The cranks are still springy though. Least I know the battery...
  16. M

    New "TSDZ2 Torque Sensor Central Motor"

    Ah yeah that's true, why if I open up the main bit and take out the motor with all the wires still attached then run walk mode and see what happens? When I put walk mode on there is a click and a whirr but chainring doesn't move. Could be the shaft that the nylon/brass gear goes onto? The one...
  17. M

    New "TSDZ2 Torque Sensor Central Motor"

    Could be, am working on my normal bikes at the mo. When I get home I can take off the drive side crank, chainring and dustcover and then run the walk mode and see what happens? I'm assuming that's how I check the clutch is gone?
  18. M

    New "TSDZ2 Torque Sensor Central Motor"

    No I can't hear it. I was trying several times earlier and I heard it maybe one or twice but nothing now. I replaced the blue gear with a new brass one. What I'm wondering about still is why is there so much flex in the cranks. If I put the front brake on I can move them several centimetres...
  19. M

    New "TSDZ2 Torque Sensor Central Motor"

    Thanks for the reply. I went and tried the walk assist. I can hear the motor whirring but there is no movement in the chainring therefore the bike does not move. My first motor was full of corrosion and mold when I took it apart so I assume it was water damage? sealed the second one with tape...
  20. M

    New "TSDZ2 Torque Sensor Central Motor"

    Thanks for the reply, I'm using the small side mounted VLCD6 display, need the middle free for my mobile phone. afaik the firmware only runs on the big display? Should also point out that I only really use 1 or 2 assistance level and use my own power mostly for sprinting between restaurants to...
  21. M

    New "TSDZ2 Torque Sensor Central Motor"

    Hey guys had to re-register but my second motor failed. Don't know what it is. Done a few thousand miles and in dreadful British weather too. Used tape on the seam this time so no water can get in. Getting no assistance whatsoever though. Display turns on fine. I did shear off the axle and told...
Back
Top