Search results

Date Relevance Most replies

  1. F

    GNG / CYC X1 Pro 3000w

    My speedo was behaving the same. It's broken. Ended using my old one from the bafang.
  2. F

    BBSHD Controller not responding after programming

    No, the connectors are definitely fine
  3. F

    GNG / CYC X1 Pro 3000w

    Can you post a video from a cold start?
  4. F

    Custom build with Astroflight 3210 and HV80 - questions

    Two more questions on the HV80- will it handle 13S (54v fully charged) or is 12S really the max?
  5. F

    Why is the HV160 / other ESC not used more widely?

    Yes, but put the prices aside. Edit: Do you have some links concerning the modifications? Edit2: Found it here: https://endless-sphere.com/forums/viewtopic.php?t=18792
  6. F

    Why is the HV160 / other ESC not used more widely?

    Just a general question to add some understanding. I´ve used the BBSHD and the CYC, both have its own advantages with the stock controllers and both suffer from poor / lack of programming. The HV160 ESC seems to perform quite well with voltages <= 13S. So my question is: why are ESCs in...
  7. F

    Custom build with Astroflight 3210 and HV80 - questions

    Would you advice to use a different motor? Any suggestions which one?
  8. F

    Custom build with Astroflight 3210 and HV80 - questions

    Could you explain why and what typical reductions are?
  9. F

    Custom build with Astroflight 3210 and HV80 - questions

    Hi guys, i am planing to use the 3210 with the HV80 for a fully, riding 80% singletrails. If the setup works I would add a cycle analyst for pas / torque control. We want to use a belt to drive the chainring with 1 reduction. I need some input from experienced users thou. Questions: - We are...
  10. F

    BBSHD Controller not responding after programming

    I have connected via the bbshd tool, could read settings all fine. Changed Throttle input to "current" and Speed / Level to "Display commad". Clicked "write", nothing happened. Now connecting to the controller isnt possible anymore, in display there is error 30 "failed to communicate". Looks...
  11. F

    Kelly KBS72151E any thoughts?

    Has anyone used the KBS72151E controller? How is the Throttle response? Is it possible (and how) to wire a torque sensor with this controller? Thanks
  12. F

    Your Creation's Before & After Pics

    First revision was with a BBSHD. We have built the battery compartment ourselfes. 14S6P with a 30A BMS. Ground clearance was awful so I had to switch to a X1.
  13. F

    Will Cycle Analyst improve motor response?

    Im riding the CYC X1 pro gen2. Overall that thing is ok, what I dont like compared to the BBSHD on the same bike and same battery (14S6P) is the startup (feels like the power ramp is slower on the CYC) and the torque response (I would like it to respond faster). Will the cycle analyst resolve...
  14. F

    Help understanding how to wire CC PHX Edge 40 HV

    Hi, i would like to compare the Castle Creations PHX Edge 40 HV to the stock controller on the CYC X1 Pro. I dont need more than 40A at the moment, dont need high speed, im riding mainly in the forest, so I need fast startup and high initial torque. How is the wiring on the controller? I have...
  15. F

    GNG / CYC X1 Pro 3000w

    How does it perform compared to the stock controller?
  16. F

    GNG / CYC X1 Pro 3000w

    Does the Talon controller support 14s?
  17. F

    X1 PRO GEN2

    How does the ASI2000 compare to the stock one? Could someone provide some screens of the availiable settings? How is the throttle response and PAS response compared to stock?
  18. F

    GNG / CYC X1 Pro 3000w

    Is it actually possible to drive the X1 Pro with the torque sensor in PAS only mode? If yes, how do I set it up?
  19. F

    CYC x1 pro gen2 - installed and unhappy

    Update: Replaced the speed sensor by the one from my old BBSHD - now I get speed readings. Throttle response still sucks. Torque sensor response is pretty well and fast - faster then the BBSHD PAS response.
  20. F

    CYC x1 pro gen2 - installed and unhappy

    Yesterday i finished installing the cyc x1 pro gen2 with the stock controller on my cube stereo pro 140. I came from using a bbshd but switched to cyc because i could not position the bafang motor well in that frame. Using a 14S6P battery with LG Mj1 cells. So my max load on the battery is...
  21. F

    GNG / CYC X1 Pro 3000w

    Anyone got a wiring diagramm for the 2-1 / 4-1 loom on the CYC X1 pro gen2? I accidentally ordered the 2-1 but need to add at least one brake contact.
  22. F

    x1 pro gen2 - gear sensor

    Hi, can anyone tell me where / how to connect a gear sensor to the stock controller of a cyc x1 pro? There is a harness with 2 brake adaptors (the 4-1) one, but there is no dedicated connector for a gear sensor. Thanks
  23. F

    GNG / CYC X1 Pro 3000w

    Hey guys, im currently using a bbshd on my cube stereo pro. Because of the lower frame geometry i cannot put the motor at a 90° degree and the ground clearance is really bad. Therefor im thinking about switching to the CYC X1 pro gen2. Questions: - My battery (14s) can deliver 60A max. So I...
Back
Top