Search results

Date Relevance Most replies

  1. O

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Sorry, i have no further informstion about firmware nor more files... so I do not recommend to update your controller. My controller is updated with that firmware file and it matches with EV Drive 3.0.3 Ev Drive 2.0.7 works but informations on text boxes are messed up. Also there is Bluetooth...
  2. O

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Hey guys!!!! Here is the newer software (3.0.3) also Firmware Updater. https://mega.nz/file/HDxHDbKS#B6XO15OIAMoMCPBwv2sAnBoXwD8DGhRHhJmjUMtSaPQ
  3. O

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Hello guys, please can someone explain what exactly is each of those check boxes?
  4. O

    Programming APT AE96600 controller (update: NOT recommended, unstable program)

    Bro, share this app with us! Does it need registration?? Does it works with 72400??
  5. O

    QSmotor/SiAecosys/Taizhou CT-22 Programming. 1 of 8

    Hello guys, Im having trouble with my "NEW" Ct22 speedometer. Its is showing 0,5 to 1 Volt lower than it should. Ive already checked bms, controller, wiring harness, connectors... My "OLD" Ct22 shows voltage correctly (older model is that with lower brightness/visibility). Is there something I...
  6. O

    Votol EM-100 & EM-150 controllers

    Just in case: Votol em150 v2 has no connector for Anti Theft, its new function cable is less versatile. If someone knows how to connect alarm/anti theft to the new wire harness please let me know
  7. O

    Nanjing far driver controllers

    UPDATE: for side stand sensor, just short both yellow/green with black wire from low brake connector from controller
  8. O

    Nanjing far driver controllers

    Hello guys, I'm new with FarDriver and have some doubts like @credendario. Please, let us know how to activate: _ Reverse (mine is working at pin8). _ Parking Switch. _ SideStand. I have Siaecosys motorcycle harness, and some connectors unused (photo attached). Also 2 connectors (low brake and...
  9. O

    Votol EM-100 & EM-150 controllers

    Both em50 and em150 had same software settings, 60A busbar current and so. em50 = 190A phase em150 = 470A phase Both were set at 60A and phase current at their maximum (i think 9000 for em50 and 9960 for em150, yes I tried 9960 on em50 and nothing noticiable happened, but Asian guys tells...
  10. O

    Votol EM-100 & EM-150 controllers

    Thanks for the comment. The 3000w QS motor that didnt match with votol em50 has thicker phase wires and is suposed to be winded for torque. The another motor, that I suspect its fake "3000w" yuma motor, has indeed good perform with @60A busbar current. In your experience, is it normal bigger...
  11. O

    Votol EM-100 & EM-150 controllers

    UPDATE about the issue I had using votol em50 with QS 3000w. As I stated, it was sluggish performance no matter what parameters I change, I even tried another votol em50 and problem remained. Then I bought Votol em150 and set the exactly the same config (60A busbar current @72v battery). The...
  12. O

    QSmotor/SiAecosys/Taizhou CT-22 Programming. 1 of 8

    Thanks for repply. It seems the bars energy never goes up like another displays, right? unless I turn off/on the display. Im going to test the J-xxxx and C-xxxx parameters as you stated. My current settings for those are J-0120 (120s seems to be the maximum for J param) and C-0300 (default...
  13. O

    Votol EM-100 & EM-150 controllers

    Please, can you tell the differences of each version? As far as I know every Votol on Aliexpress are now "s" version. But there are Lande Votol (transparent cover) that seems to be the top pick for Asian guys on YT/Facebook groups etc. I have Votol em50 (7280s). It has auto learning from...
  14. O

    Top mounted automatic connectors for removeable batteries

    Battery connectors on the botton is the worst idea ever. You may change the connectors every week due to meltdown. Both battery and bike connectors suffers a lot of stress and vibration. The battery slot should be very tight otherwise friction may occur, but it will get loose anyway and...
  15. O

    QSmotor/SiAecosys/Taizhou CT-22 Programming. 1 of 8

    Hello guys, This thread is a gem. Its been very helpful for me. I have both DKD and old CT22 display. The reason im using DKD is due to my battery pack (LiFePo4). I've been able to ajust battery bar offsets to make it as linear as possible. My lifepo4 72v nominal battery pack: 100% = 79.2v...
  16. O

    Votol EM-100 & EM-150 controllers

    Both share the same wire - pin 8 (5v) from 16pins connector
  17. O

    Votol EM-100 & EM-150 controllers

    Hello guys, Im having problem with a brand new Votol EM50. When throttle is connected, the voltage from pink wire (+5v) drops to around 0,35v~ then throttle error icon is shown in display. Ive tried another controller wiring harness and another throttle, the problem remains. I have another...
  18. O

    Votol EM-100 & EM-150 controllers

    The bike I stated is this: https://br.e-scooter.co/urbet-gadiro-e-125/ Its sold in Brazil with the name "Shineray SHE-S" or "Watts e125". Is basically a clone of super soco TSx but with votol em50 + yumma 3000w 17" hub motor. With yumma motor its performance is very good like 100cc~ bike...
  19. O

    Votol EM-100 & EM-150 controllers

    Thanks for repply. I have DKD display and it shows the current, it goes up to 60A. I've already set flux weakening to 0. Also I tried KI 100-2000. But no matter what I do, it looks like 20-30cc bike. My votol em150 is stucked at customs. If it works, then the sellers are right about em50 may...
  20. O

    Votol EM-100 & EM-150 controllers

    Max speed goes (wheel off ground) 1120~ RPM, display page is not minus RPM
  21. O

    Votol EM-100 & EM-150 controllers

    This motor came with the bike, the brand doesnt give details. But its iron core, 45h, 30 pole pairs. Yes I did test with the spare hall connector and the result was the same. Ive tested with both Lande Votol 7280s and Votol em50s. Next week ill test the em150, If no torque remains, then I go for...
  22. O

    Votol EM-100 & EM-150 controllers

    Thanks for repply, I already tried changing phase wires /hall wires. Motor runs smooth but no torque. Even a 1500w citycoco has more acceleration than me. I suspect there are some compatibility issues with QS motors, if its high pole pair numbers or winded for torque. I've seen another guys...
  23. O

    Votol EM-100 & EM-150 controllers

    Hello Guys, Is there compatibility issues with Votol controllers and Hub QS motors? In a Gadiro e125, it uses Votol EM50 + Yuma Motor 3000w, its performance is very good like 100cc motorcycle. But I have a Hub QS motor (3000w, 17", torque winding, 45h, iron core, 30 pole pairs). The...
  24. O

    [HELP] Lingbo controller 72352

    I finally managed to make my own USB cable and right software to connect it to PC. check out my tutorial (download link included) www.youtu.be/UtGWzKypv94
  25. O

    [HELP] Lingbo controller 72352

    I got all the wirings and made a TTL cable with same 6 pin connector. When connected to controller, it gives 2 beeps + 14 beeps. When I click connect to the software with com port x, it gives time out error. Tried to on/off the bike but no results
Back
Top