Search results

Date Relevance Most replies

  1. T

    Votol EM-100 & EM-150 controllers

    Hi, friend! According to your config sent to me. Nothing. I spent several hours without success. The data circled in the screenshot is not recorded. No matter how much I tried, the readings after the reboot are like this ..
  2. T

    Votol EM-100 & EM-150 controllers

    Thanks a lot, friend! I'll try it today and I'll be sure to post the results.
  3. T

    Votol EM-100 & EM-150 controllers

  4. T

    Votol EM-100 & EM-150 controllers

  5. T

    Votol EM-100 & EM-150 controllers

    Thank you so much for such detailed advice, friend!! The first thing I need to do is restore the factory settings! I have the original file unchanged. But he stubbornly refuses to write it down. It does not record not only amps, but also volts. When saving, it gives out what I sent you. So I'll...
  6. T

    Votol EM-100 & EM-150 controllers

    Thanks for the tips! I'll start with the current situation. I will send 4 screenshots. On the first two, the full original settings of my EM - 50 from the factory. When I save them, he himself changes them to others. These are screenshots 3 and 4. And he does not return them to the factory after...
  7. T

    Votol EM-100 & EM-150 controllers

    Hello BareKuda! I'll start with the main thing, I'm Ukrainian, not Russian .. Thank you for responding to my message! Yes, the problem is still the same .. Nothing helped from what I tried or advised me. I suffered for almost three months with the controller and its settings. Now the controller...
  8. T

    Votol EM-100 & EM-150 controllers

  9. T

    Votol EM-100 & EM-150 controllers

  10. T

    Votol EM-100 & EM-150 controllers

  11. T

    Votol EM-100 & EM-150 controllers

    See what I got. I wrote down your settings and substituted my values ​​in order to go. It is clear that they are not ideal for my motor, but .. Regen was almost gone, and although he blinked on the screen, the free movement was not bad at all. But when I started adjusting to my settings, the...
  12. T

    Votol EM-100 & EM-150 controllers

    Thank you for your advice. My regeneration is at 0%. And it did not affect the smoothness of braking when resetting the throttle. It seems to me that these 2 regenerations are independent of each other ..
  13. T

    Votol EM-100 & EM-150 controllers

  14. T

    Votol EM-100 & EM-150 controllers

  15. T

    Votol EM-100 & EM-150 controllers

  16. T

    Votol EM-100 & EM-150 controllers

  17. T

    Votol EM-100 & EM-150 controllers

    Thanks for your configuration! I got! I'll try to change the values ​​​​to mine and try. I wrote that I have a direct drive. And on the last Chinese controller there were no problems at all, soft, smooth. But the last one was only 30 amps and I wanted to add power by putting Votol. He then...
  18. T

    Votol EM-100 & EM-150 controllers

    Did not work out! Regeneration still sharply slows down when the throttle is released. Can you upload your config file? I'll substitute my values and upload the file. Thank you!
  19. T

    Votol EM-100 & EM-150 controllers

    It's a good idea! I will definitely try today! Thank you!
  20. T

    Votol EM-100 & EM-150 controllers

    Greetings! At 0.89 it no longer starts. 0.9 is also my minimum value. Most likely the controller has it in the program.
  21. T

    Votol EM-100 & EM-150 controllers

    I can't understand.. Maybe the translator doesn't translate correctly? What is "start voltage" and what is "turn off always"?? On the monitor page, gas reset regeneration is displayed! Show me what to fix on my settings. And better underline with a red line! All settings are sent! Thank you!
  22. T

    Votol EM-100 & EM-150 controllers

    Unfortunately, it did not work out.. Everything is unchanged for me.. :-(
  23. T

    Votol EM-100 & EM-150 controllers

    "Allow regeneration: disable" is this "ebs ratio"? 0% Yes, I will do the same as in your screenshots. I wrote that the throttle stick can support 0.9. Maybe less, I'll try. Thank you friend! I'll test today, I'll be sure to write the result!
  24. T

    Votol EM-100 & EM-150 controllers

    :bigthumb: Excellent, Paulflieg!! I haven't tried this yet! I tried to separately remove the percentage of regeneration. I tried to reduce the starting voltage separately. Together in this combination did not try! And I have hope! I will definitely try tomorrow! I circled your screenshots in...
  25. T

    Votol EM-100 & EM-150 controllers

    Thank you for your attention and information! I think that in firmware 2.33 this regeneration mode should also be disabled. The method may just be different. The support guys are silent, but I will write to them again. I can't believe everyone likes forced regeneration. For a direct drive motor...
Back
Top