southbayken
1 µW
- Joined
- Dec 11, 2019
- Messages
- 1
HI Guys,
I'm hoping someone here can help out with a similar situation. I recently flashed my TSDZ2 motor and LCD3 with version .20. Bike runs like a dream! But a problem is happening after a few days of riding. Motor cuts out when the speed spensor is attached. Speed sensor is working and I turned off any speed limits in the setup. Kinda weird. Motor kicks-in from a dead stand-still and motor watts go up to about 100 or so and then cuts off and won't come back on until I come to a complete stand still again.
I'm going to try resetting the LCD3 to see if that helps and possibly reflashing. Before I order another speed sensor and try replacing, I thought I would reach out to see if anyone else has had this problem.
Thanks in advance!
I'm hoping someone here can help out with a similar situation. I recently flashed my TSDZ2 motor and LCD3 with version .20. Bike runs like a dream! But a problem is happening after a few days of riding. Motor cuts out when the speed spensor is attached. Speed sensor is working and I turned off any speed limits in the setup. Kinda weird. Motor kicks-in from a dead stand-still and motor watts go up to about 100 or so and then cuts off and won't come back on until I come to a complete stand still again.
I'm going to try resetting the LCD3 to see if that helps and possibly reflashing. Before I order another speed sensor and try replacing, I thought I would reach out to see if anyone else has had this problem.
Thanks in advance!
