Recent content by Arbol

I subscribe myself. I also have seen some products at taobao, unavailable anywhere else, and I do not know how to purchase them.

Thanks Paul. Very interesting comment indeed.

Yes, that is a relevant question, thanks. I hope somebody can give us an answer.

No news?

Taking out the front wheel of a 26'' MTB with QR would not suffice?

Can car shops solder alu?

I subscribe myself. Good luck.

I have a thread exactly on this same issue, so maybe you can refer to it, in order not to duplicate the number of threads talking about the same issue: http://endless-sphere.com/forums/viewtopic.php?f=14&t=59145

Thanks d8veh.

So, do you think a q100h could withstand 48V at 18A, set by a S12S with the max amperage set at 18A (this can be regulated through the LCD, it is possible that it was yourself who pointed that out to me)?

Thanks.

Thanks fellow for your follow up. A S12S with the max current modified via LCD at 18A would possibly provide 48V @ 18A cheaply, right? It would be interesting if the Q100H withstands without getting too hot 48V @ 18A.

Thanks for the pictures, voicecoils. Quite helpful. A few questions: 1. I see 7 balance wires (one black and six red). I assume you have a 13s4p configuration. As a consequence, there should be 14=13+1 balance wires. Are the other 7 balance wires at the back (not visible in the picture)? It...

I think I know the solution: join last pin of the first battery with the first pin of the second battery (and so on). These two pins should share the same pin at the BMS (the fifth).

Having three 4s of these hardpacks connected in series (no parallel), one has three 5-pin (4s plus ground) JST-XH, so 15 pin. A 12s BMS has AFAIK 13 pin (12s plus ground). How is everything connected? Through a balance board?