Recent content by DanAmes89

Why not purchase them individually if they are from the same company, meant for the same bike?

TThank Thanks for the tip but my bike has two controllers in it being dual motor and the display and everything have to match they got to be originals from the company Ariel Rider and I don't see that working. I'm down for more suggestions though.

To any and all eBike Experts... I've got the dreaded Error 30H on the display of my Grizzly V3 by Ariel Rider. I've tried everything and don't know what to do. Attached to this post will be pictures. I unplugged everything on the handlebar plugs as well as the cadence sensor as well as the...

Hello. I own a grizzly V3 by Ariel Rider. I'm in the process of uninstalling the old controllers and installing the replacement controller sent to me by Ariel Rider. I do not know how to do that. I could not find a YouTube video or anything with the instructions of how to do so. Could you guys...

Thanks but I figured out the problem. It has nothing to do with the motor. The rear wheel was not seated perfectly straight when put back on. So It grinded. Now I put it on straight, no more noises.

You're dumb. Quit wasting both of our time and if you have no advice to reply then don't.

Yes. It used to work perfectly. Worked perfectly for about 6 months. Then itt started having problems. On the display screen it says 11H, and sometimes cannot engage the rear motor when a throttle it. The front motor always works great. Any other questions that you like me to answer?

HI. I own an Aerial Rider Grizzly V3. The rear motor keeps making it grinding sound whenever I activate it or sometimes cuts out completely. What could be the solution of this? What should I do?

I was unable to get a picture of it last night. You ain't right now I'm posting it now.

I have a Grizzly V3 by Ariel Rider. Trying to disconnect the power cord going to the rear wheel and for some reason or another it is just not unscrewing and not disconnecting. Any help would be greatly appreciated here's a picture. Just need to know how to unscrew this without damaging it. Thank...

Good stuff man. Thanx

I have a 60v 40ah e-bike battery that had 60 amps of continuous current. Used the battery with a controller, display, and motor wheel that were programmed for 80 amps of continuous current. They were all from the 3000w NB Power Conversion Kit (except the battery of course). At first, My display...

Ive got a RadMini4. And on it, I have the NB Power 3000W Conversion Kit. There's more to the kit than what I have on the bike, but I currently have the TFT-UKC1 display, the NB Power 3000w Rear Hub Motorwheel, and the 3000w 48v-72v Speed Controller. Last night I just did the wiring and hooked...

Spoke to RAD. They discontinued the RadMini4. Now I have a different problem. I'll put it on my next post. Posting now...