How do I disconnect the power cord on the rear wheel without damaging it? (With pics)

[DanAmes89]

I have a Grizzly V3 by Ariel Rider. Trying to disconnect the power cord going to the rear wheel and for some reason or another it is just not unscrewing and not disconnecting. Any help would be greatly appreciated here's a picture. Just need to know how to unscrew this without damaging it. Thank you very much.

 

[amberwolf]

If you can post a good clear well-lit picture of the connector in question it might help us help you better.

Some connectors don't unscrew, but just unplug. Some unscrew a retainer ring then unplug. Some unscrew pushing the plugs apart. Etc.

 

[E-HP]

Any help would be greatly appreciated here's a picture.

If you can post a good clear well-lit picture of the connector in question it might help us help you better.

I guess if the picture is too clear, it becomes invisible?

 

[amberwolf]

I guess so...despite the thread title and the specific words in the post to that effect, there is no image linked or attached to the OP's post, which is why I asked for one.

 

[DanAmes89]

I guess so...despite the thread title and the specific words in the post to that effect, there is no image linked or attached to the OP's post, which is why I asked for one.

 

[DanAmes89]

I was unable to get a picture of it last night. You ain't right now I'm posting it now.

 

[99t4]

Your photo unfortunately is well-focused on everything but the connector so I can't make a definitive identification. So asking you to compare the real-life item to this well-focused one:

photo courtesy of GrinTech.

Is it the same?