Recent content by deano

points noted. thanks. I have spot solered the top of every cell. charged and then repacked, so should be getting good connection. Get you on the different charge state and this could be my problem. Let's see what happens, until then, I am having some fun. love my e bike. :D

Bingo! Striped me Battery Pack. Charged all 96 up on me Intellicharger. Came across three dud ones. (binned them) I discharged several on me I-Mac. Capacity was fine. Repacked battery pack. I have done compression, just like a torch battery holder, so was easy to replace the dud ones. She...

yes 16S3P x2 in parallel and a https://em3ev.com/shop/9-fet-irfb4110-infineon-controller/https://em3ev.com/shop/9-fet-irfb4110-infineon-controller/https://em3ev.com/shop/9-fet-irfb4110-infineon-controller/

Battery Pack is 16850 batteries. No BMS. Compressed. Charges to 66.7. Configuration is 16p cells x 3s = 48 x 2 = 96 My Pack has 96 of the https://www.amazon.com/Panasonic-3400mAH-Lithium-Rechargeable-Battery/dp/B00D2UDSG8 Has been working sweet for 3 months. I can strip and test every...

Its been a part so many times. I do not have the skills to go in there. I have a great friend, who had a go at it for me, even though its not his bag, but I believe his work has come loose as he put new hall sensors in and did his best to fix it for me. Testing wise. took all installation off...

Many thanks for that. Have gone through all the Hall wires, outside the hub. No breaks, so must be in the Motor. Will go for new rear motor, Shall I go for a Mac again? or know off a good one in the UK?

This problem has occurred after many hours of running perfectly. Take a look at video of issue https://youtu.be/1DEleU3gg9s Full power is there with rear wheel off the ground. Revs out to full capacity. When I put under load, the power is gone. and stays like this through the test. I switch...

OK have sourced all from Paul at EM3EV, It made sense as analyzer and other parts are wired for my contoller. The analyzer is 6 wires and could only find the CA V2 with 6 wires. Just a 16s Li-ion Lithium Battery Charger required now. Thanks for all the help. Will let you know when I get her...

Different bike Kiddio

The buggers stole my beast. Got it back no thanks to the Police. (long story) but I found it some young scallywags back yard, by peering over fences on local estate. Bingo! Trouble is they have raped it, they could not get it fired up so just cut the electric bits away. (I nearly cried!) So...

Thanks to all. Bike is running sweet. All cobbled together :lol:

Don't now how I've done it but lost the charger to this Battery https://goo.gl/photos/WEfyGhVF4JHSEjM26 Its a minefield out there ! anybody recommend a charger please 36v. Live in the UK. Thanks

Started new thread at https://endless-sphere.com/forums/viewtopic.php?f=2&t=85469 Had a brainstorm and are going with a 18650 Compression Battery Pack Build.

Starting project my hardware spec can been seen at previous thread https://endless-sphere.com/forums/viewtopic.php?f=2&t=85084 Pack is 16S / 6P The batterys go nicely into the casing Had "sliding boards" laser cut and done some mock ups Now with shrink wrap around each spring. Looks all...

Are you sure? battery starts at No 1 (last column/bottom cell) on bottom image. Top image is reverse side starting at No1 (1st Column/bottom cell)