Recent content by groundproximity

I tried that, however according windows that driver is up to date. I tried today under XP no problems at all. Regardless of the COM Port i choosed. The only thing is that i once read, that the failure message 8020 often refers to a problem with one of the MSCOMCTL.OCX files that have to be...

Yeah i did. Downloading and installing no problem. Same problem there - when i send the data i get the message that the transfer didn´t worked. I will try an old computer with XP today - maybe that´ll work.

Okay guys, thanks for your ideas - but: Even when i change the COM port of the USB Adapter to either 1,2,3,4,5 i get the same failure message any time i hit the "start transmit" button. Confused...

Hi i checked the device manager and it says COM 13. Since i can only choose from 1,2,3,4,5 in the program i had to enter COM 13 manually. I assume that this is the problem but on my system COM Ports 1,2,3,4,5 are already blocked by windows. So maybe i have to reconfigure that somehow. Don´t...

Hi, i´m using this well known software for my Lyen controller. With Windows XP no issues but with Windows 7 Professional 32bit i get this message as soon i choose the correct COM port and hit the "start transmit" button. Search engines produce a variety of blogs and forums dealing with this...

This is a sensorless solution but i don´t have any problems at all. http://endless-sphere.com/forums/viewtopic.php?f=2&t=29731&start=15 I run 16S A123 and 2KW continous. The motor gets a little bit warm. Mine has almost no exterior air cooling since it is covered. I couldn´t tell what AWG...

Methods, I expected, that the "test rig on 66V 10Ah lipo with 100A current limit" would need some extra heavy duty dual torque arm setup or so... but i guess then i´m fine with my setup. Thanks for your advice.

Hey methods, would you mind to post a pic of your torque arm installation with this setup. I´m very interested if mine would take that enormous torque. Thanks!

Approx 500 km so far. Many hill climbs. 1800W cont. No issues at all. Motor gets warm. Maybe 50°C I´d say it was worth to replace all the wires. No issues with the sensorless Lyen Controller.

In the front i have Magura Big. But they have to work hard. 20kg Trike/7kg motor/5 kg battery/plus 80kg me. 112kg @ 50 km/h... they do get warm :mrgreen: The rear is just for parking. Also the brake to stop the tilting movement is a mechanical disc brake. The space below the seat looks bigger...

Battery on top of the rack. The additional weight is good. Before i was able to get the tail in the air with these Magura Big disc brakes in the front. Controller (silver) under seat. Video to come...

Finished. Around 50 km/h with 16S A123. The acceleration is crazy. I´m running 2000W now which is well enough. 1500W or even less would still do it. Two flashing 1300 lumen LEDs in the front and back - and i have always enough space on the road :mrgreen:

Here´s my try to improve the cable problem. First i got new phase cables. Those are silicon glass silk 250°C heat resistant wires. They are a bit thicker than the stock ones. I will use them just inside the motor and in addition i will cover them again with some high temperature heat...

Well... there are enough people who purchase the trike. Good products need no big advertisement. I had to wait almost 4 months for mine to be finished.

Thats the very first version. There have been a lot of improvements in the meanwhile. Carbonfiber seat, no ugly box and new improved rack. ...turn down the volume. The music sucks. http://fn-trike.de/Reinhold/HTM/seite1.html