Recent content by Iroise2000

Hi from Switzerland ! I received the tangent 2 days ago, and first track today ! awesome :D :D :D The build was easy, only some minor thing to adapt. It is yet with 7s rclipo 10'000 mha Thanks Dave for that so impressive kit !

Hi, Thanks for yur messages and encouragement ! For me it is my first experience with middrive. But what i can say after only 3-4 trips, bike is much better in balance as my old hub motor. I have no experience with so high power more than 5000W Matt and other have with astro... For moment i go...

Hi, First excuse my bad english language. I had some years ago two hub ebike, but know i discover a totally new life with my new non hub ebike. I have made the choice to try Matt Davinci system + astro 3220. I made the choice to try a right drive and not the regularly left drive as many do with...

Hi ! Long time ago (1 month) i started to mount a new board with drive and power system ! I just received yesterday my alien power esc (dual) and the two motors. I can't connect to alien esc with prolific drivers and the APS.exe program. Hope someone here has an idea what is problem. I...

Hallo ! Firts excuse for my english language ! So i'm new with eskate and i just received few days ago the kit from Richard. This is awesome ! and super light. Now i wait for electronics + battery. I will certainly build just with one motor for the first test... i ride a lot skate but 15...

Hi ! I've read that controller for BMC 1000W is a problem. I have a BMC V3 1000W since last june 2009, and ride it with a KEB Kelly controller KEB72450 peak 150A controller. Since 6 month no problem !, it run very smooth and i can program it. The only "small" problem i ahd, was melted phase...

oups, the links i put in the precedent post are not working : Go tu endurance serie light, and then for tails light, the 200 series or the 400 series. The small 200 is awsome ! Yann

Hallo ! Excuse my bad english from swiss ! I have bought last year a set of front and back light, a little expensive, but all my friends that have tested them, bought some too ! It is really awesome ! With the backlight, no more dangerous vehicule near yu, they all let 2 or more metters...

Another precision for precedent post, i checked the voltage on the entry of the bms for each cell : 3.33 3.33 3.33 3.49 3.50 3.50 3.51 3.51 3.50 3.50 3.48 3.52 3.52 3.50 3.50, they are 16 wire, but i can mesure only 15 cells ?, oups i don't understand all ! Between the first and last : 52.0V...

Hallo, Thanks for this very interesting discussion and excuse my bad english ! I've problem since last wek with my ping too. The symptom : when i was riding, suddenly, no more power and the controller is off. i have about 40 charges with this 48V 20Ah ping battery. Drawing about 25-30 A with it...

Hallo, Excuse my bad english ! I will go try to entry into RC lipo's pack. I will certainly buy a icharger 1010B+ It is better to make 3 or 4 x 5S pack in series 3 or 4 x 6s packs ? to opitimize charging on the 1010B+ (i will have 4 x 5S 2P or 4x 6s 2P) It seems that i can charge two 5S pack...

Hallo, See my posts on page 2 above, for me with my ping battery 20Ah 48V that can deliver 2C continus max, i have 36 mph max speed and a max peak current of about 40A (limited by software configuration of my kelly controller). I'm not a seller, but a customer that have bought a bmc V3. I'm...

Hi, it is the Kelly KEB72451, yu can use it with 24-to 72 volts. No problem with 48V. I've bought this one, so one time i will try more voltage. In the instruction, there is written yu can handle to 1.25 nominal voltage, so 72x1.25 = 90 Volts. My ping battery when full charged has 59 volt, and...

Hi, So just a week with my new BMC V3 !, I've made about 140 km with no problem !, i'm so happy. Today saturday, i put anderson connector on my wattmeter and i've made a 10.82 km ride. I run pretty fast with stop and start and a small hill with 3%. The registered max Ah is 39.85. The...

Hallo, I live in swiss and just receive last week my BMC V3 from electric-bikes.com in a 26" wheel. They are very professional, and the pakage was well made and fast secure shipping. Today i've made my first test !!!!, just a word : awesome !!!!! I have a 48V 20Ah ping battery V2 + a new kelly...