j bjork

Suddenly without any warning these turned up: The tracking number I got still hasnt moved.. I have been chasing info about how to...

You cant do anything tricky without a clutch anyway 😉 https://www.facebook.com/share/r/cNcDPZkYPjECRM4n/

You have your throttle voltages set up correctly? I dont remember if there is a low safety value to set up, or just a high?

I think the user can add the switches and buttons they want for extra functions, as long as there are avalible inputs that are easy to...

Nice, I just saw this thread :-) I am never in the bicycle section. Do you plan to have inputs? I mean like a 3 speed switch, or a way...

Answered my own question, so thought I'd add an update for potential future enquiries. I found R625 on the opposite side of the board. I...

Problem is that it is not nickel, I think it is nickel plated copper. And there is a slit in the middle. 10p of molicell p45b, so I...

The copper plates arrived a few days ago: About 2kg for one battey :confused: Maybe I should have asked for 0,5mm thick, they...

You can hit auto balance, but then you dont know if your balance settings are working as you want. If you just leave it charging you can...

And you have set it to 20s?

they have 35e wrappers first issue i see is the solder iron burnt the cell holders the rest looks fine except that the shrink wrap is...

If you cant change your settings, start with typing in the settings you want then press "setting" and also "save". Do that with one...

Cool, is pin 12 a ground pin on yours? Does it say version somewhere? The new v4 of the smaller controllers have some sort of 3speed...

The diode is not to protect the coil, it is to protect the switch or whatever that is controlling the coil from the voltage spike that...

No, you have the pre charge resistor controlled by a relay. So when it is off, the hv is off. You only turn on the pre charge a second...