Here is a charger with 2 battery connectors.
This charger seem to be made for 2 batteries from the factory while the other charger i showed earlier had a Y-connectors to go from 1 to 2 battery connectors.
In some ways Meanwell HLG-600H-54A is sort of what i would like.
But I don't really trust it to be watertight.
I have seen the same kind of design with 2 end plates on controllers and DC-DC converters and they look really not tight.
I'm no expert but constant current and constant voltage at...
Something like that but not a fan of the AC inlet/water collector.
Would like 2 permanently mounted cables going out from the charger and then you can have the end of those cables go inside under the seat protected from the rain but the charger is elsewhere so it does not take up space under the...
What charger would you use outdoors that can be used in water/rain/moisture/winter/summer/etc. ?
Wanted to mount the charger on the e-bike.
I have this kind of 5A charger for my 48 volt 25 Ah lithium-ion batteries.
Works fine indoors. Not so much outdoors.
I haven't seen much in waterproof...
Gogoro has connectors at the bottom and the seat holds the battery down.
Yamaha Neo's has the connectors on the side at the bottom but you manually has to close/open the spring loaded lock mechanism that holds the batteries down.
I'm not trying to accomplish anything I just want to see what exists with automatic connectors that sits at the top of the battery instead of bottom.
Having to connect/disconnect the battery connector manually gets tiring after a few hundred times doing it.
I kind of prefer to keep it somewhat...
Seems like Reention Dorado might be inserted at an angle.
I meant lowering the battery straight down into a hole that is closed on all sides except the top.
Have anyone seen batteries with automatic quick connectors at the top of the battery instead of at the bottom?
Like when you lower the battery into a hole under the seat of an electric e-bike some might have a connector at the bottom of the battery and hole.
But i was wondering if there are...
This website have some high current chargers like QW481-600-L:
AC 220V Factory Direct Sale DC 54.6V 60a 3600W charger for 13S 46.8V 48.1V Li-ion/Lithium Polymer battery
Model Number:QW481-600-L
Output current:60a(Max)
Brand Name:QUAWIN
Min. Order: 100PCS
Output power:3276W
Weight: 8000g(only...
I have not seen any information provided.
Only thing i have seen is this device that can read the data from the BMS.
Which is nice. But would rather know how to do it with my computer
How can a computer read data fra a BMS that can communicate via RS485?
The BMS can provide data such as SOC, SOH, Cell voltage etc.
Let's say i get an USB-RS485 converter then i guess there can be communication.
But how does the computer get the data?