Recent content by timk

I know it is only simple but do you have a repo with your code so far?

This open source tool appears to work, I have been using it to interrogate the STC in my BBS02 but have not tried flashing anything yet: https://github.com/grigorig/stcgal Other people online seem to have been using it successfully. Cheers

It would be interesting to see what happens if you send a command to raise the current limit above 30A...

Nice work Daniel!

Now that VESC has native PAS support, it would be awesome to see a VESC controller that could be swapped into the housing where the Bafang controller goes. I have done some simple layouts in the past but haven't done any high current stuff so this is beyond my abilities. Happy to look at if...

Interestingly this is the same family as the MCU in the motor controller...

Sounds like an interesting idea. Shame about the D79F9211. For reference this is the STC in my 2016 vintage BBS02: $ stcgal -P stc15 Waiting for MCU, please cycle power: done Target model: Name: STC15F2K60S2 Magic: F408 Code flash: 60.0 KB EEPROM flash: 1.0 KB Target frequency: 18.437...

Thank you bigmoose!

Hi all, I asked my BBS02 supplier (EM3EV) the recommended grease for the steel reduction gears and they suggested "Schaeffer 238 Grease Moly Ultra Supreme #1". I'm not able to find anyone to supply this brand in Australia, does anyone know a suitable alternative? I have read about others...

Thank you Chalo and dustNbone, I'll now sleep better tonight! :)

Hi all, I've noticed this area seems to be leaking some kind of oil or grease: Do you think it is a problem? The BBS02 has done just over 3,000km. It is otherwise quiet and seems normal. I haven't done any maintenance on it at all other than re-tightening the lock rings. Cheers!

Very nice, I'd be keen to take a close look at this one day! Do you work in the city?

Another update - bike has now almost hit 2,400km and only just now has required another re-torque of the motor. I haven't had any other issues other than a bit of rubbing from the 28mm tyres - it's really touch and go with this frame and I've been told the GP4000 tyres are fatter than...

Thanks melonbr3ad! I don't think you'll be able to get away with not using a cable outer near the BB unfortunately; there's not much clearance at all. Yes the motor is held in place by friction on the sides of the BB housing. You will want the motor to be hard up against the bottom tube or it...

I have almost clicked over 500km now and the lock ring is still intact, and no other issues! I'm very happy with the bike and I'm using it daily for commutes. I've fitted a rear mudguard but other than that it has just been a matter of cleaning the chain and charging the battery!