Search results

Date Relevance Most replies

  1. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    is it correct that the cromotor has a drop ot of 165mm? so it does not fit into a normal frame, right? TheCrown has a drop out of 140mm and it fits in a normal frame, right?
  2. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    it is good to hear that there is no issue with TheCrown on high voltage... :D yes it looks like you can go with higher Amps.... :twisted: 100V and 100Amps sounds good to me...
  3. R

    Qulbix Raptor ebike + frame kit

    hey guys can anyone tell me what the weight of the bare frame(without swingarm) is? Thanks...
  4. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    @dotrick so TheCrown runs good on 100Volts or do you have any issues with it? wich controller do you use? we want some pics...:) @WeejockpoopongMcPlop how is your bike? what speed could you achieve with it? we want some pics...:)
  5. R

    The Crown vs 24 inch Rim grrrr

    @Spacey all you have to do, is just to flip the spokes bei 180°, they will have 1x cross and the lenght should be OK, too. Is it possible to upload a picture directly to the forum?
  6. R

    The Crown vs 24 inch Rim grrrr

    Hey Spacey, i would not ride the bike the way you laced TC in this rim...it is not correct...and for sure it is dangerous if you want to go high speed. The way you laced the spoke they will pop out the holes very easy...you laced it wrong. Check out the original Crystalyte picture again...you...
  7. R

    Crystalyte TC65 + Lyen 18fet + 24s Lipo

    hey sacko let us know about the new Crystalyte TC... do you have your TC now? have you build it in your bike yet? years ago i had a Crystalyte 72V 50A controller and a ran it with a 90V battery...it was OK...i had no problems with the controller...even on a very hot day...it was going good...
  8. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    i would guess, that in europe you can get the motor from: crystalyte-europe and in USA from HighPowerCycles... @Hyena any news about the testing of TheCrown?
  9. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    @Heyena yeahhh...that would be cool...7kW continuous at only 9kg...that would be pritty good for a hub motor TheCrown has better magnets(up to 150°C), better lamination and more copper inside the stator...maybe the 7kW is realistic especially for a hub motor(because it spins with low rpm and...
  10. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    @Drunkskunk no, no and no. maybe you got me wrong. I just want to say: it is wrong to say that a product will cause problems just because it has a different design. and saying that by just looking at some pics of that product. sofar NOBODY at this forum knows anything about this motors...
  11. R

    Tested an e-motion Jumper today. Impressive

    looks very nice and very clean...i like the design but price is a bit over the top...
  12. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    @amberwolf the design of the new motor TheCrown doesnt cause any problems at the moment/so far... at the moment it just looks unique and cool... :D sorry mate....but...at the moment all your guessing about the design of the spokes and the used materials are pointless... because at the moment...
  13. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    hey JRH when i get you right, than your concern is that under the "wrong" circumstances a spoke can pop out the hole and get lose...is that what you mean? i like the design of the motor AND of the spokes because it is different to these that you see at any other motor...it looks cool all the...
  14. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    they are not exactly the same, but similar to the Mavic... when i see the Mavic hub-design...i have much more trust in the Crystalyte design...:) when this Mavic hub have prooven their design, than the Crystalyte design will be fine...:) @pchen92 there is an easy access dont worry... you can...
  15. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    +1 for the integrated temp. sensors i think for this kind of motors the temp. sensors is a MUST... i hope Crystalyte will put 2x sensors inside the motor...
  16. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    i dont think there will be any big issues with the spokes or the spoke holes... Crystalyte tested this design very carefully and there was no issue with the spokes or the spoke holes... the rotor is made out of aluminum...and i dont think there will be some issues about it... we will see who...
  17. R

    New bike makes me want to cry.

    just spread the rear frame...15mm is nothing... you will hove no problems with the frame...spreaded it will be as strong as it is right now...so dont worry about it...just do it...:)
  18. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    @Kepler yes, you can remove the sidecovers without unlacing the wheel @steveo according to Kenny TheCrown has more torque than a X5400
  19. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    i must agree with neptronix...there is so much unused slot space left on this picture of the TC stator...looks like 15% unused slot i hope that it is because this pictures shows the very first prototype and that the production batch will have more copper in it and the slots will be filled...
  20. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    Thanks hi-powercycles for the background informations of this motor... To me this motor looks more and more like the real deal...with the proven weight of only 20lbs=9kg and better performance than the X5400... @hi-powercycles would you post a foto of your prototype...i am curious about the...
  21. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    Crystalyte is going to use 12g spokes for this baby...so, what do you worry about? Yes...the spokes are special...but i dont see any problems about it...it is sooooooo easy to bend a spoke to the shape that you want/need... If you dont want or cant bend a spoke to the right shape, just order...
  22. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    i got the information direct from Crystalyte i have just one more pic: according to Crystalyte: This motor is with 40mm width magnet and 6mm2 motor phase wire. It will run up to 100km/h @72V...in the speed version. It will run 80km/h @72V...in the torque version. more copper wire inside...
  23. R

    Crystalyte NEW HIGH POWER hub motor...TheCrown

    Hey guys i just got some pics and specs from Crystalyte about their new high power hub motor called "TheCrown"...and i want to share them with you... Here are some pics of it: And here is the stator...alot more space for the copper wire... According to Crystalyte this motor is made for...
  24. R

    New crystalyte motor - G series

    i dont see the problem to buy and bent a straight spoke to the right angle by yourself... at the end you are a DIY-guy...if you can open hub motors, repair the halls and make thicker phase-wires...your should be able to bent a spoke to the right angle
  25. R

    New Clyte motor 7400

    hey CROMOTOR...Xlyte is just Kenny...so how can Xlyte be bigger than you??? :D seriously...i know Kenny for 4 or 5years now...and i know for sure(100%) it is NOT a copy of your motor... in 2008 Kenny made a motor with hollow axle design for me...it was my own design(i designed it by my self...
Back
Top