Search results

Date Relevance Most replies

  1. L

    bms woes

    I dont know, thanks for trying to help but i guess i just dont get it. I was hoping for more of a - wire 1 bms goes to wire #.
  2. L

    bms woes

    ykick, i am using 12cells, two 6s packs that have 7 wires on each connector for a total of 14 wires. Etrikes diagram uses 13 wires, my bms has 12 wires 1.2.3.4.5.6.7.8.9.10.11.12 - on the bms 1.2.3.4.5.6.7 and 1.2.3.4.5.6.7 - on the batt packs sorry if im not understanding
  3. L

    bms woes

    Hi guys, thanks for the replies. I'm still in the dark though. My instructions use 12 wires and your uses 14, I can see how yours work but no idea how to get my 14 into 12. Here is my instructions.
  4. L

    bms woes

    Hi Folks, I purchased a supower bms on ebay and im having some trouble with it. I wired it in as per the instructions but it has let the special smoke out of #7 resistor. This is the connection between the two 6s packs i think. This is why i dont have a bms yet after two years of ebiking, every...
  5. L

    Everything you need to know about electric magnets in 1hr

    That was brilliant. Thanks for sharing.
  6. L

    bestech d131 24s question

    hi folks, Ive heard somewhere that you can use a bms with less cells than its designed for. I have a 24s bms but would like to use it for 14s. Is this possible and how do i go about it? Thanks Matt
  7. L

    Mac sanyo dynamotor code stamp

    Not at all sure how I double posted this thread. Would a moderator please delete double thread. Thanls.
  8. L

    Mac sanyo dynamotor code stamp

    Hi all, I have a sanyo dynamotor geared hub. It was given to me a while back and set aside in the workshop for future use. I dragged it out today and had a look. It has a code stamped on it - MAC074933. I have tried googling the numbers however nothing comes up. Does anyone know what these...
  9. L

    Mac sanyo dynamotor code stamp

    Hi all, I have a sanyo dynamotor geared hub. It was given to me a while back and set aside in the workshop for future use. I dragged it out today and had a look. It has a code stamped on it - MAC074933. I have tried googling the numbers however nothing comes up. Does anyone know what these...
  10. L

    switched from 20" > 24" wheels

    What A SLUG!!!! 20" wheels for street 24" rear wheel for offroad I switched from 20" wheels to 24" rear wheel and what a slug! lost all that torque ad acceleration. Honestly guys I dont know how anyone runs 24" with a 1k motor. I weigh 63kg and the 24 struggles to maintain speed on stupidly...
  11. L

    The wheel-building spoke-lacing thread, post your tips

    I built my first wheel a few days ago. What a great feeling. I no longer have to rely on someone else.
  12. L

    MXUS 3000 Hub Motor - V1 V2 V3

    Hi, Can anyone tell me if they build a mxus 3k with different length spokes left and right or are people using same length spoke to build the wheel centered on the hub flange? Any info would be great. Thanks.
  13. L

    Electric BMX

    Just thought id update the thread. I now have an old diamondback frame I got from a friends bike shop for £5. I made some proper torque plates and had them brazed on. Got a front disc mount brazed on to the bmx forks. Made a ca mount for the stem so it sits safe within the bars and centered up...
  14. L

    troubleshooting intermittent sensored gear hub motor

    I had this happen to me very recently. Intermitent working/not, didnt seem to be any rhyme or reason to it. It would be randomly jerky/fine/nothing. It ended up being the throttle - the wires going to it. I stripped the old throttle and found the green wire only holding on by a single strand. It...
  15. L

    One motors journey... from kids 24 to Mongoose to Mundo

    Sarcastic coment removed. Apologies for jumping the gun.
  16. L

    The Unofficial 'CroMotor' Owners Tech-Tips Thread

    ^ sounds like a recipe for a hot motor. I would defo use a small wheel. "Volt up gear down" has served me well in rc and ebikes.
  17. L

    Fitting a speed cable to cycle analyst

    Holy shmokes grin are quick for international shipping. I ordered on the 27 may, recieved package today! Canada to the UK in two days is fast. I wish my bike was that fast! I have another question about this cable. I have soldered it on to the ca, all good. The cable is quite short. Does the...
  18. L

    Bestech d131 instruction?

    Thanks a bunch dmun, im sure im asking quesions previously answered but I couldnt find anything about the missing c pad on goog.
  19. L

    Bestech d131 instruction?

    There are 9 pins on the first plug. The model number on the item is hcx-d131b.
  20. L

    Bestech d131 instruction?

    B- batt neg P- controller neg. I dont have a C-
  21. L

    Bestech d131 instruction?

    Also does anyone know why I have no c- solder pad?
  22. L

    Bestech d131 instruction?

    Re title, does anyone have a copy of the d131 bms instruction manual if there is such a thing? Thanks
  23. L

    Fitting a speed cable to cycle analyst

    Thanks fellas!
  24. L

    Fitting a speed cable to cycle analyst

    Hi folks, has anyone fitted a speed cable to a ca. I have ordered a speed cable as I run a cadp on a sensorless motor. Is there any instructions with the cable or do I have to wing it? Thanks in advance. Matt.
  25. L

    Lipo to Bestek D167 wiring

    Thanks fo clearing that up ykick.
Back
Top