Search results

Date Relevance Most replies

  1. X

    Bafang G510/M620 (Bafang Ultra) thread

    I find the Ultra annoyingly loud on the Frey 1000HT. Google says that is normal on the Ultra. I have no comparison to brand new condition as the bike was bought used but fairly new. It can be properly be heard from 10m away. Way louder than my other M600 and TSDZ. Is there a way to reduce the...
  2. X

    删除

    Cool, that is interesting. I wonder if this is a personal project or whether it is going into production. Google translate says: "I can not speak English Mechanical structure: level 1 Gleason gear, level 2 to 3 helical gears, gearbox requires angular contact bearings, mechanical parts will not...
  3. X

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    Thanks Wayne, I will try and splice a TSDZ2 thumb throttle to a female triangle plug and try it out. There is no additional battery cable to the yellow triangle connector unlike your Dengfu bike, just the black and red power cable. So, just to confirm again, it is female connector at the...
  4. X

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    After installing the TSDZ2 on my old 26inch full suspension carbon frame mtb, I am awed by the smoothness of the torque sensing pedal assist. It felt so natural I bet my son will not be able to tell if I didn't tell him it has an electric motor. Lovely motor kit, low priced. Even the throttle...
  5. X

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    Yes, apparently the M600 does have torque sensing + 2 speed sensors. I was confused with the BBS02/BBSHD vs tsdz2 when I was researching a motor kit for my light 26 inch mtb. I ordered a tszd2 in the end since it is lighter, cheaper and has torque sensing.
  6. X

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    That is a pity Wayne. Thanks for the info Tom. I am contented to leave my M600 alone with the original controller. I bought the Frey HT1000. Its Bafang Ultra is quite nice. It uses torque sensing and is very smooth to operate. Very different from the M600 using cadence sensing. I will try it...
  7. X

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    Totally agree with you Wayne. The M600 is a fantastic robust little powerhouse. And it is so quiet. A total handicap with the locked software setting. I was browsing through the display setting just now. There is nothing I can tweak, even the wheel size is locked at 28inch, speed limiter is...
  8. X

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    Hi Wayne, I have refitted my original controller. Voila! Nice smooth progressive response again. I believe it is lower level of assist at lower setting 1,2,3. I will not go back to the FLX controller. I found it very abrupt and rough.
  9. X

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    I can agree with you Wayne. I have forgotten how smooth it was with the original controller but now that you mentioned it I did feel the over powered cut in at low speeds. Like you I found it quite a nuisance and even slightly hazardous. I may swap back to my original controller but I will have...
  10. X

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    I am happy for you Wayne. You can afford a new battery from the money you saved for not buying a complete M600 motor set. :lol: I have a stash of the awesome high discharge Sony VTC5 cells. Trying to figure out a way to increase the range of my bike as I live in a pretty hilly area here. My...
  11. X

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    Hi Wayne, the display that I got from FLX is ver 1.2. Your Luna display is 2.0. There is likely a compatibility issue. If I were in your shoes I would try an FLX controller first. Afterall it is a 79usd gamble vs 650usd. But I can understand your frustration to just get the bike fixed asap...
  12. X

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    Hi Wayne, my 860c colour display from Luna also powers up immediately without pressing the ON switch and gives error 30. Maybe it is worth a gamble to get a matching dpc240 display from FLX. It is a cheap gamble. Perhaps not all dpc240 displays are similar. Bafang is really shooting themselves...
  13. X

    Wayne’s Dengfu Carbon Fibre FS 27.5” with Bafang M600 (throttle also)

    Hi Wayne, what you are experiencing is uncannily familiar to my experience with the M600. An error 30 that eventually lead to a dead motor. Just to confirm, did you get a matching pair of controller + display from FLX? I did and it fixed the bike. If you tried matching a new controller with your...
  14. X

    Bafang M600 error code 30?

    Just to share my experience with M600 owners. Be careful. I learnt the hard way. The controller is specifically matched to the display. I spent 1 year trying to fix the darn M600 bike. Changed cable and bought a colour 860c display but nil joy. Finally managed to get a controller and matching...
  15. X

    Bafang M500/M600 thread

    You can try FLX bike. https://flx.bike/collections/replacement-parts/products/controller-dz-multi Be careful. I learnt the hard way. The controller is specifically matched to the display. I spent 1 year trying to fix my M600 bike which gave error 30 and eventually refused to power up. Changed...
  16. X

    Bafang M500/M600 thread

    My motor won't even power up, ever. Is there a supplier that can sell the controller only?
  17. X

    Bafang M500/M600 thread

    Any solution found for this issue? I have this exact same issue for many months now. Bike is still grounded after replacing the display and cable assembly. It has to be the controller on the motor.
  18. X

    Bafang M600 error code 30?

    You mean the control board on the motor assembly?
  19. X

    Bafang M600 error code 30?

    What can explain the new 860c display powering up immediately when connector is plugged in? Why will the display power up without pressing the ON button? Another clue is the battery will drain within about 2 weeks if installed on the bike without use.
  20. X

    Bafang M600 error code 30?

    My bike refused to power up the display a few months ago. Motor can not work. I have checked all visible wiring from the motor to the display and all sensors. All good except for some wire chafing which I have fixed. Unable to check the wire bundle inside the frame though. I replaced the...
  21. X

    Where can I buy cable for Bafang M600?

    Hi guys, I would like to replace the cable from the Bafang M600 motor controller to the Display unit due to wire chafing damage. Can anyone provide a link to any vendor that might sell it?
  22. X

    Bafang M500/M600 thread

    Hi guys. I am new to this forum. I have an M600 powered mountain bike which I am unable to power up for quite a few months now. I have checked the battery voltage to be good. There is no visible wiring issues but I have not looked inside the motor controller box yet. I believe my unit comes with...
Back
Top