Search results

Date Relevance Most replies

  1. M

    FLIPSKY new 20s 100A tiny controller (vesc based)

    The normal vesc tool app has profiles just the same as you mentioned for the metr app. The flipsky "pro" version had Bluetooth built in that you can use the app and profiles with or a cheap nrf51 adapter for the older controllers. You can set a % of current or watts and a speed limit for each...
  2. M

    TSDZ2 on 72v

    It's a creative solution that should work OK for lower amperage controllers. Just keep in mind it's efficiency, I think their normally around 85-90%.
  3. M

    Makerbase VESC 84200HP 84V 200A (possible bug)

    I've got a 84100 on its way to me, just passed customs. Does the aux out not work? Any other issues to watch out for? I'm currently running a 75100 and bought this as a spare but gonna test it out when it arrives to make sure all OK as had another 75100 that blew a mosfets as soon as i plugged...
  4. M

    VESC- FSESC 75200 ADC1/ADC2 voltage increase issues

    Glad its sorted. You thinking it was noise from the phase cables?
  5. M

    R.OS VESC display

    Is Squareline Studio fairly straight forward for lgvl design? As I'm wanting to design a custom page to load with vesc tool on an old Android I'm gonna temporarily use as a display. I'm wanting to design one that includes a gauge for battery amps top as how it's displayed currently on vesc tool...
  6. M

    VESC- FSESC 75200 ADC1/ADC2 voltage increase issues

    I think my throttle (adc1) is at 0.30s and haven't noticed any issues. Do you have filtering enabled for the signal as I found that really important to get a smooth pas signal.
  7. M

    R.OS VESC display

    Glad it came it handy. 👍 I look forward to seeing more when you get the chance, I'm fairly new to using a vesc with my bbshd but been really impressed and while the vesc tool is handy my old bbshd display is the only thing I miss from the old controller and yours is easily the best combination...
  8. M

    R.OS VESC display

    Look forward to seeing the repository for this as gotta be the smartest looking display I've seen for a vesc. Looks perfect with perhaps only one exception, Bluetooth uart forwarding. As I have my bbshd's pas sensor on one of my uarts and a nRF51 module on the other. Not sure if your familiar...
  9. M

    BBSHD info for vesc controller

    Had a mosfet blow on my controller so I've got a 75100 being delivered tomorrow, been looking at upgrading to an external controller for a while but needed something ASAP to get the bike on the road again, couldn't afford a bac855 etc that quickly and didn't fancy risking the bbshd to a generic...
  10. M

    Sarcen Ariel 1

    And battery number 2 is built, 15ah as well but higher capacity batteries so it's a 15s5p.
  11. M

    Sarcen Ariel 1

    Haven't finished the batteries cover yet as waiting for some sockets and a voltmeter to arrive but wedged it in to take for a test ride and was hitting over 1800w's and felt like it was holding the higher speeds a lot easier than my 48v battery. I'm running bbs-fw so it does 33a's. I'm torn...
  12. M

    Sarcen Ariel 1

    Well that's one battery done and labeled up ready for the bms. Just need to wrap it up and put a bit of padding before finshe the exterior of the box It's a 15s6p 15ah, the cells are 10a max cont and so I've tried to make sure the cell interconnects would be up to the job but at the moment...
  13. M

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    Ah OK I used to do the same with my 48 battery to get it up to 52v. I've changed to a full suspension now though so had to build a battery to fit in the frame so I've gone for a 15s6p. Just need to finish up the bus bars and charge it up.
  14. M

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    I was trying to find the link but I'm usinga fork of this that included programming to keep the chain going at very low power above 10mph in order to reduce chain slap etc. Ill reinstall the standard custom firmware later to see if it stops it, be a shame if it's the cause as was a handy feature.
  15. M

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    Thank you, you've given me something to try in the morning. Hadn't even in thought of the throttle, its a cheap twist throttle rom amazon. I'll get back to you tomorrow. 👍
  16. M

    Sarcen Ariel 1

    You can see the work in progress of a custom frame battery pack for a 15s6p battery. But what you suggested is exactly what I'm planning on for a 2nd 15s4p that I'm going to make and mount under the downtube. I've got a solid metal case I can use that'll protect it. I finally bought a much...
  17. M

    Sarcen Ariel 1

    So after seeing this pic : I got the inspiration to do the same, surprisingly it'll fit 90 batteries. So started ripping apart some old batteries: After a lot of ummming and arhing I decided to go for a 15s and only charge the cells to 4.1. I'm running the custom firmware so 61.5v should...
  18. M

    Sarcen Ariel 1

    Thought I'd post up a build thread this time as it's know the 3rd frame my bbshd has been on. So i was riding my old cube acid frame: And I got fed up with my ass taking the brunt of the awful pot holes roads I ride down so got a fantastic deal on a sarcen ariel frame: And then found a...
  19. M

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    Does anyone have the motor push forward as if I'd given it a blip of the throttle when you turn the display on? It ain't no real issue when I'm sat on the bike but I have had it wheelie away when turning it on while holding stood to the side.
  20. M

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    I don't know about the display but be interested to see your battery build. As I'm in the process of building a 15s6p for my bbshd. Gonna charge it to 4.1v a cell and it should work fine with this firmware.
  21. M

    BBS-FW: Open Source Firmware for BBSHD/BBS02 Controller

    Funny enough I asked the exact same question a few pages back. Since then I've changed my bms to a smart one and I can see it is drawing the 33a as in the settings, it's just for what ever reason the display doesn't show it correctly. So no need to worry, despite what the display says the...
  22. M

    Generic Bafang display Emulator?

    https://endless-sphere.com/sphere/posts/1780007/ Theirs a lot of info on this thread and the link to the github project on the first post. Theirs pros and cons but for me the only negative is that the shift sensor doesn't seem to be so effective using the custom firmware.
  23. M

    Generic Bafang display Emulator?

    Im currently using the custom firmware on mine but when I had it stock and used the speed app I'm pretty sure it had all the settings, certainly the vast majority of them.
  24. M

    Generic Bafang display Emulator?

    I'm pretty sure the android "speeed" app will do what you need, you can program the controller and use it as a display just from swiping the apps pages.
  25. M

    (SOLD) 3010wh, 288 cell battery pack with BMS and charger £250

    Where abouts are you? And do you have any pictures of the battery packs or their dimensions?
Back
Top