Mark_A_W
100 kW
Hi guys
I got a Soft Start Infineon Controller from Voicecoils, to use with my MAC Shanghai at 60v nominal (74v off charger). The one with the 100v caps and 18 x 4310 FETS.
Being a 72V controller, I think the LVC is set at 63v, which is no good for me.
I need to set it to below 50v. Around 40v would be fine.
I was hoping there would be a LVC pot, but there isn't one.
Can I do this? Is it adjustable? Changing components (even smd) is not a problem, I just need to know what to change.
(I will also remove one shunt bar, 45+A at 60v is way too much for the MAC Shanghai, and hotglue down the caps.)
Thanks
Mark
I got a Soft Start Infineon Controller from Voicecoils, to use with my MAC Shanghai at 60v nominal (74v off charger). The one with the 100v caps and 18 x 4310 FETS.
Being a 72V controller, I think the LVC is set at 63v, which is no good for me.
I need to set it to below 50v. Around 40v would be fine.
I was hoping there would be a LVC pot, but there isn't one.
Can I do this? Is it adjustable? Changing components (even smd) is not a problem, I just need to know what to change.
(I will also remove one shunt bar, 45+A at 60v is way too much for the MAC Shanghai, and hotglue down the caps.)
Thanks
Mark