jackjetful
100 W
- Joined
- Feb 15, 2013
- Messages
- 158
latest pic____________________________________________
Hello guys its been a while scince my last post
This build thread should describe my latest build; all the improvements i wanted to make on my old frame and all I've learned from my last homemade frame
To make it short :
This was my last and first frame built:
http://endless-sphere.com/forums/viewtopic.php?f=28&t=50819
https://www.youtube.com/watch?v=N6I05G5x81Q
Had a lot of fun building, and also riding it. Final setup was:
- Kelly KBS 4805
- 9C Motor 2kw
- 48V 10Ah LifePo4
Issues with this bike:
- high weight (steel frame)
- bicycle parts such as rear derrailleur and chain broke under full load!
- high center of gravity
I bought a BHT big block a year ago and wanted to eqip my frame with this motor
______________________________________________________________________________
-> decided to build a complete new frame:
-> fully aluminium
-> BHT motor on swingarm
-> low center of gravity
-> made the first sketch:
-> 3D CAD modelling over two years now ---> came to this results:
[/attachment]View attachment 5
-> built a CNC plasma cutter (2x1m)
-> bought 6mm Aluminium (Al Mg 4,5 Mn) -> plasma cutted forst parts:
View attachment 3
---->> welding is almost done .... more pics will follow soon
Hello guys its been a while scince my last post
This build thread should describe my latest build; all the improvements i wanted to make on my old frame and all I've learned from my last homemade frame
To make it short :
This was my last and first frame built:
http://endless-sphere.com/forums/viewtopic.php?f=28&t=50819
https://www.youtube.com/watch?v=N6I05G5x81Q
Had a lot of fun building, and also riding it. Final setup was:
- Kelly KBS 4805
- 9C Motor 2kw
- 48V 10Ah LifePo4
Issues with this bike:
- high weight (steel frame)
- bicycle parts such as rear derrailleur and chain broke under full load!
- high center of gravity
I bought a BHT big block a year ago and wanted to eqip my frame with this motor
______________________________________________________________________________
-> decided to build a complete new frame:
-> fully aluminium
-> BHT motor on swingarm
-> low center of gravity
-> made the first sketch:
-> 3D CAD modelling over two years now ---> came to this results:
[/attachment]View attachment 5
-> built a CNC plasma cutter (2x1m)
-> bought 6mm Aluminium (Al Mg 4,5 Mn) -> plasma cutted forst parts:
View attachment 3
---->> welding is almost done .... more pics will follow soon