motomech
10 MW
Bought a cheap generic Chinese controller and it starts as soon as the power wires are connected, no throttle connected
Running it sensorless, so only 5 wires connected, the two power wires and the three phase wires.
Almost 5V at red throttle and blk (ground) throttle.
and 3.5V at signal throttle and blk (ground) throttle.
Any ideas on what I could look for.
I got my money back, but would still like to get it to work.
Thanx
Running it sensorless, so only 5 wires connected, the two power wires and the three phase wires.
Almost 5V at red throttle and blk (ground) throttle.
and 3.5V at signal throttle and blk (ground) throttle.
Any ideas on what I could look for.
I got my money back, but would still like to get it to work.
Thanx