eltek smartpack conrtoller programing

[kavaCanada]

Dear friends,
I hope all are well. Kindly I need help for explanation how this eltek smartpack convert the input voltage to digit on the screen and how to reconfigure this controller if he is not reading the values correct.
thanks for all of you in advance.
Kind regards

 

[dominik h]

What Kind of flatpack do you have.
I hooked the smartpack controller to a 220vdc and a 380vdc Flatpack2 He and there it shows wrong values. I never checked with the 24V Flatpack and I never tried to reconfigure the smartpack controller, because I program mine with a USB-CAN converter.
A year ago I had bought a vertiv controller which was set for a 24V system and this could only be changed with another Firmware, there was no possibility in the controller to "change" it to 48V.

 

[kavaCanada]

What Kind of flatpack do you have.
I hooked the smartpack controller to a 220vdc and a 380vdc Flatpack2 He and there it shows wrong values. I never checked with the 24V Flatpack and I never tried to reconfigure the smartpack controller, because I program mine with a USB-CAN converter.
A year ago I had bought a vertiv controller which was fset or a 24V system and this could only be changed with another Firmware, there was no possibility in the controller to "change" it to 48V.

thanks for your reply I'm dealing with flatpack2
and the controller is
I need to know how to readjust the reading Volts & Current because the controller reading the Amp and the voltage value wrong

 

[dominik h]

Are the displayed values far off?

 

[kavaCanada]

Are the displayed values far off?

some of them if the real current load is 3Amp they reading 7Amp and for the batteries current 1Amp even I'm not connecting batteries.
but there is two controller they reads 1273 Amp without any load.
I change the ( 3v battery) and clean the compartment of it from the leaked LITHIUM ) but still measuring.
Kind regards