ID for this vpower controller? Infineon 12 FET? Keywin /XPD?

[GaryJS]

Hi guys,

Anybody recognise this controller? I was hoping to enable regen braking (for the braking effect more than the regen effect) and play about with the various settings using Keywin / XPD. It looks very similar in layout to the 12 FET infineon controller but I don't see recognisable jumper points (e.g. BK for ebrake, CR for cruise etc..) Can anybody help at all?

Top:

Bottom:

on the top view, the programming header is blocked by the red supply wire (It's a 4 pin connection, presume +5v, 0v, rx &tx).

I bought it from vpower.hk (as a 24V 500W controller but I'm running it at 36V and seeing 30Amps on hills..)

 

[joss76]

hi,
I have one other controller vpower but a 18fets and i need regen to ( and cruise ..)

i had the µc name X8M06-D and the board it's a X8M06aE_PO4.1

if somebody can give infomation ...

( sorry for my poor english )

 

[GaryJS]

Interesting that they have a range! What power can your 18 fet deliver? I was surprised that my 12 FET can deliver 30 amps!

 

[vin791]

were you guys able to find anything elsewhere? im looking for the same info

 

[GaryJS]

Afraid not - not yet.... Anybody?