steveo
100 kW
Hey Everyone,
I was wondering if anyone knows how many -- phase & battery amps can be produced in this case out of a IRFP4468 TO-247 Package Mosfet with the Adaptto Max E ?
In essence, i'm trying to find out what is the mosfet itself safe limit to determine exactly how far i can push the power of the Max E..
The only thing i've ever run to compare and have a idea with the power limits .. was a infinion 12 fet modified with irfp4568 mosfets that ran with a 24s lipo pack.
from what i tested on the same motor x6 hub motor .. i was able to peak around 200amps @ 88.8v approx 260 per phase or 780 total phase amps... with just a 12 fet square wave pcb and irfp4568 fets..!!!
so.. assuming i have the ultimate thick copper traces & wires & connections & cooling .. should i not be able to hit 300amp dc current on an adaptto ? and push 1000phase amps say with 12s or maybe 18s lipo?
please correct me if i'm wrong .. if anyone can explain what exactly to look at to determine this on the spec sheets!
http://www.irf.com/product-info/datasheets/data/irfp4468pbf.pdf
http://www.irf.com/product-info/datasheets/data/irfp4568pbf.pdf
-steveo
I was wondering if anyone knows how many -- phase & battery amps can be produced in this case out of a IRFP4468 TO-247 Package Mosfet with the Adaptto Max E ?
In essence, i'm trying to find out what is the mosfet itself safe limit to determine exactly how far i can push the power of the Max E..
The only thing i've ever run to compare and have a idea with the power limits .. was a infinion 12 fet modified with irfp4568 mosfets that ran with a 24s lipo pack.
from what i tested on the same motor x6 hub motor .. i was able to peak around 200amps @ 88.8v approx 260 per phase or 780 total phase amps... with just a 12 fet square wave pcb and irfp4568 fets..!!!
so.. assuming i have the ultimate thick copper traces & wires & connections & cooling .. should i not be able to hit 300amp dc current on an adaptto ? and push 1000phase amps say with 12s or maybe 18s lipo?
please correct me if i'm wrong .. if anyone can explain what exactly to look at to determine this on the spec sheets!
http://www.irf.com/product-info/datasheets/data/irfp4468pbf.pdf
http://www.irf.com/product-info/datasheets/data/irfp4568pbf.pdf
-steveo