The left side wall, two large 3 prong components.. looks like diodes
amps were going through my anmeter, and I was seeing only a 8A draw..
Im getting a new PS, anyone want this dead one?
funny part is, before I wired my pack in series, I was charging each cell seperately.
and getting great performance..
from the 15Ah 3.3 A123 prismatic cells
I was monitoring the voltage at cell terminals, while charger was set at 3.65v
voltage would rise to approx. 3.45v and just stop rising..
continue charging for 15+ minutes before again rising to 3.65 charging level
Now as the cells are wired in series, the cell voltage will NOT pass 3.31v
- could be because Im using the CellLog 8 balancing wires to charge the cells individually..
using 3.3v 150watt PS, the amp output on a 3.2V cell is only 3 amps max.
I rarely bring the pack cells resting voltage below 3.10 volts/