xdaass
10 mW
- Joined
- Feb 2, 2015
- Messages
- 25
Hi Guys,
just to share my new enclosure.
was trying a lot of options starting from plastic lunchbox to an old external CD-Rom Enclosure which manipulated to fit.
was trying to use Velcro, and strong 3M duble lock solution which none worked and the enclosure always got disconnected from the board
so i created a simple mold
https://goo.gl/photos/S2gcaqHL9tr1gpXh7
https://goo.gl/photos/MreAdbzxoK2s757N6
went to a workshop which had a vacuum forming machine and created my own enclosure 3MM thick
https://goo.gl/photos/mapYqw8zYnqyzGhj7
https://goo.gl/photos/pqxLEbvbdAxp5smh9
then use a T nuts + 6M screws to put mount it all together on the board
https://goo.gl/photos/p1Va1LZNPE6xYNoX9
+ add a battery voltage meter
https://goo.gl/photos/KkE3BSBiHvAg8YcJA
just to share my new enclosure.
was trying a lot of options starting from plastic lunchbox to an old external CD-Rom Enclosure which manipulated to fit.
was trying to use Velcro, and strong 3M duble lock solution which none worked and the enclosure always got disconnected from the board
so i created a simple mold
https://goo.gl/photos/S2gcaqHL9tr1gpXh7
https://goo.gl/photos/MreAdbzxoK2s757N6
went to a workshop which had a vacuum forming machine and created my own enclosure 3MM thick
https://goo.gl/photos/mapYqw8zYnqyzGhj7
https://goo.gl/photos/pqxLEbvbdAxp5smh9
then use a T nuts + 6M screws to put mount it all together on the board
https://goo.gl/photos/p1Va1LZNPE6xYNoX9
+ add a battery voltage meter
https://goo.gl/photos/KkE3BSBiHvAg8YcJA