gurujeff03
10 µW
- Joined
- Sep 7, 2017
- Messages
- 5
I am reviewing the wiring on my JRAHK controller (generic chinese controller) and a generic display.
It has 3 different wires for speed display with not much information about them and I was wondering if anyone can shed some light on what they are or differences
1) Speed display wire (Brown)-what would the output be?
2) multiple data meter (yellow/green)
3) hall speed meter (blue/green)-I'm pretty sure this is just the same as the motor hall output.
My display that I'm connecting to is generic as well and it needs the following
1) instrumentation line (yellow) I'm thinking this goes to the speed display wire #1
2) phase speed measurement (purple)- Pretty sure this would connect to #3 and help the display do RPM but not necessarily speed
Also has Red/Black and some turn signal/headlight wires as well but I'm good with those.
It has 3 different wires for speed display with not much information about them and I was wondering if anyone can shed some light on what they are or differences
1) Speed display wire (Brown)-what would the output be?
2) multiple data meter (yellow/green)
3) hall speed meter (blue/green)-I'm pretty sure this is just the same as the motor hall output.
My display that I'm connecting to is generic as well and it needs the following
1) instrumentation line (yellow) I'm thinking this goes to the speed display wire #1
2) phase speed measurement (purple)- Pretty sure this would connect to #3 and help the display do RPM but not necessarily speed
Also has Red/Black and some turn signal/headlight wires as well but I'm good with those.