Sweden_Rob
100 mW
- Joined
- Mar 20, 2017
- Messages
- 46
Welcome to Swedish high preformance e-bike building
Now its time to make another bike. This time we are going to build it on qulbix new q76 frame.
We gonna make the building as a video series.
Setup:
Frame: qulbix new 76
Motor: Mxus v3 prepped with ferrofluid
Motor rim: 24" Halo SaS with special orderd high quality stainless steel spokes produced here in Sweden.
Batteries: 22s7p Samsunt 25R
Controller: Adaptto max-e (e-bikes starts to get fun over 8kw :wink: )
Vlog1: Introduction of the project!
[youtube]nE8gF973y-g[/youtube]
Bonus clip: A nice little short clip about the first bike.
[youtube]075Jj9vbWeo[/youtube]
Vlog2: Battery building with spotwelding
[youtube]aZ4FksI5mK8[/youtube]
Vlog3: Minimum requirement of tools when soldering connectors.
In many cases, the first time you do something you cant imagine all the problems you are going to face.
That is why I put together this video, so if you are new at this, maby building the first bike for yourself.
You can see what kinds of tools you need to have for a good soldering work.
If you think I miss something, i would like you to comment below.
[youtube]ekirEmqF48Y[/youtube]
Vlog4: Connect Adaptto controller with domino throttle.
Dont forget to put in the resistor, otherwise you can not calibrate the throttle
[youtube]A9XEygTNeVg[/youtube]
Vlog5: A look at the new q76 frame
just got the package out and want to share my first view on it!
[youtube]Ntz-H-ZTfXs[/youtube]
Thanks for wathing!
Now its time to make another bike. This time we are going to build it on qulbix new q76 frame.
We gonna make the building as a video series.
Setup:
Frame: qulbix new 76
Motor: Mxus v3 prepped with ferrofluid
Motor rim: 24" Halo SaS with special orderd high quality stainless steel spokes produced here in Sweden.
Batteries: 22s7p Samsunt 25R
Controller: Adaptto max-e (e-bikes starts to get fun over 8kw :wink: )
Vlog1: Introduction of the project!
[youtube]nE8gF973y-g[/youtube]
Bonus clip: A nice little short clip about the first bike.
[youtube]075Jj9vbWeo[/youtube]
Vlog2: Battery building with spotwelding
[youtube]aZ4FksI5mK8[/youtube]
Vlog3: Minimum requirement of tools when soldering connectors.
In many cases, the first time you do something you cant imagine all the problems you are going to face.
That is why I put together this video, so if you are new at this, maby building the first bike for yourself.
You can see what kinds of tools you need to have for a good soldering work.
If you think I miss something, i would like you to comment below.
[youtube]ekirEmqF48Y[/youtube]
Vlog4: Connect Adaptto controller with domino throttle.
Dont forget to put in the resistor, otherwise you can not calibrate the throttle
[youtube]A9XEygTNeVg[/youtube]
Vlog5: A look at the new q76 frame
just got the package out and want to share my first view on it!
[youtube]Ntz-H-ZTfXs[/youtube]
Thanks for wathing!