theabsurdman
1 mW
- Joined
- Jul 15, 2022
- Messages
- 16
Building my first e-bike pack, I plan to have a BMS and a bulk charger wired to the BMS, but I also want to be able to use a balance-charger periodically to monitor and fine-tune the state of the in-series groups. The question is how to connect the balance charger to the pack? Should I unplug the balance wires connector from the BMS and plug it into the balance charger or add a 2nd set of balance wires just for the latter? And how do I connect the balancer-charger's power cable? Through the pack discharge cable mounted on the BMS? Or should that be connected directly to the pack terminals by-passing the BMS altogether?
In short, would having a BMS in-place interfere with the normal operation of a balance-charger?
In short, would having a BMS in-place interfere with the normal operation of a balance-charger?