Looking for FET replacement

Buckis

1 mW
Joined
Jan 4, 2013
Messages
12
Location
London
Hello anyone have idea for analog for DH100N06 FETs, that's for China 6FET controller with dashboard screen support
 

Attachments

  • DSC_2884.JPG
    DSC_2884.JPG
    3.4 MB · Views: 316
  • IMG-20220626-WA0004.jpg
    IMG-20220626-WA0004.jpg
    107 KB · Views: 316
You want to replace just the FETs? Are you sure they are blown out? If yes, then:

Not too many specs available for that part you listed. I found:
68Vds
20Vgs
100A Ids max

With those specs you might just try an IRFB4110; it will likely work and in fact be a better part.
 
One short, as cable was damaged, after replacing cable was hall sensors fault, replaced them now no faults, but ignition off and motor has resistance... Checked FETs for short...
 
JackFlorey said:
You want to replace just the FETs? Are you sure they are blown out? If yes, then:

Not too many specs available for that part you listed. I found:
68Vds
20Vgs
100A Ids max

With those specs you might just try an IRFB4110; it will likely work and in fact be a better part.

IRFB4110 seems difficult to get...
 
Buckis said:
IRFB4110 seems difficult to get...
There are literally thousands of other FETs out there, many better than the IRFB4110. Just choose one that has the same or better specs (what few specs there are, that is.) Digikey has a handy search function that lets you do just that.

For example, all these should work.
 

Attachments

  • FETs.JPG
    FETs.JPG
    509 KB · Views: 296
Back
Top