Jazzman56
100 mW
Hi Guys,
I'm well on the way to making my first Ebike. I'm using a Norco Fluid 7.2 with a Bafang BBs02 and 14s 6p 18650 pack (bought from Michal ;P thankyou)
This is my build log of the process
I've got both the 18650's and Bafang in transit.
I need some help with getting point in the right direction/recommendations with regards to a BMS and Bulk Charger. I'm looking at charging each individual cell to around 4.1v or similar to extend there life.
I'm currently looking at a best-tech power BMS (one of these http://www.bestechpower.com/518v14spcmbmspcbforli-ionli-polymerbatterypack/) and a bulk charger from Greentime (goo.gl/dSzoLG)
Regards,
Jazzman56
I'm well on the way to making my first Ebike. I'm using a Norco Fluid 7.2 with a Bafang BBs02 and 14s 6p 18650 pack (bought from Michal ;P thankyou)
This is my build log of the process
I've got both the 18650's and Bafang in transit.
I need some help with getting point in the right direction/recommendations with regards to a BMS and Bulk Charger. I'm looking at charging each individual cell to around 4.1v or similar to extend there life.
I'm currently looking at a best-tech power BMS (one of these http://www.bestechpower.com/518v14spcmbmspcbforli-ionli-polymerbatterypack/) and a bulk charger from Greentime (goo.gl/dSzoLG)
Regards,
Jazzman56