Gabcauseican
10 mW
- Joined
- May 5, 2019
- Messages
- 22
Started out as my daughter scooter........
the E300 is a little too big for her......(still learning how to ride).....
Problem is.....way to slow for me........
Hit the old interweb....saw a couple ideas.....(top mount wasn't an option) my opinion ......... SLA way to heavy....
No place for them......lithium it is......
Placed an order for.....48v 1000w motor kit(motor controller throttle).....
48v20ah lithium battery
T8f chain
44t sprocket
The test mule
The motor and all her glory
Last but not least the battery....(added foam and silicone waterproofing)
The motor don't fit without modify they frame heavily........must cut out the kickstand...... smash the frame and alot of grinding......... reroute the brake cable......the chain tensioner must be flipped around and grind down flat so the stock bolt and nut can be used..... cut out the rear motor mount to accommodate the motor bracket
the E300 is a little too big for her......(still learning how to ride).....
Problem is.....way to slow for me........
Hit the old interweb....saw a couple ideas.....(top mount wasn't an option) my opinion ......... SLA way to heavy....
No place for them......lithium it is......
Placed an order for.....48v 1000w motor kit(motor controller throttle).....
48v20ah lithium battery
T8f chain
44t sprocket
The test mule
The motor and all her glory
Last but not least the battery....(added foam and silicone waterproofing)
The motor don't fit without modify they frame heavily........must cut out the kickstand...... smash the frame and alot of grinding......... reroute the brake cable......the chain tensioner must be flipped around and grind down flat so the stock bolt and nut can be used..... cut out the rear motor mount to accommodate the motor bracket