Recent content by Brlowe

So with this if I’m using my Garmin it will show me speed, do I still need to use the speed sensor on the TSDZ2?

Thank you

Hello all, I have been away from this for a long while, do you have a working wireless solution? Can it be controlled from a garmin gps or something similar? Is there a set of instructions on how to set it up? I’m currently running open source but it is over a year old on the version. Running it...

Really? When I google "Best grease for Plastic gears" the first thing that comes up says most manufactures recommend white lithium grease or silicone-based grease? I will look for the grease you listed and or make sure my lithium is not petroleum based.

Thanks for the link to the new thread. I will be following this closely and will build one of these once you have a working model and an app for Garmin or iphone or both. Do you plan on this having the motor temp option for display?

A wireless setup like this would be assume. I have a Garmin 830 and my iphone on my trike already. Would be great to remove the display and some wires and just have a small box attached next to the motor. Let me know if you need a beta tester.

I'm installing a new 48V motor and new blue gear in my TSDZ2 and want to know if White Lithium grease would be good for the gears? I have a tube of it is why I ask. Thank you

Are we able to flash the SW102 display yet without opening it?

I do have the power limiting sensor on my motor. How do I lower the cq power and whhat does it do? Is it the same and just selecting a lower power level?

Today I went out on a 10 mile ride, air temps high 60’s. Had the power set at level 7-9 and my motor temp got up to 167 f. The house was very warm to hot to the touch. What is safe and how can I help keep the motor cool. I have a 36v overclocked motor with a 52v battery. Would the 48/52v motor...

I see this a couple posts up, I did not write this. LOL

I have my temp set for imperial. The up and down increment it 1 step at a time until I press the power button to set the value and then it jumps to a different value. Did you do it on an 860c? I will video it and send a video to you email or I can try to post it here.

My system has been switched to an 860C with the latest 0.7.0 firmware. First let me say the new firmware has solved the surge issue coming out of settings. New issue. In setting under motor temp I am not able to just set min and max values. It acts like there are preset numbers and the only way...

They were both green but the remote is a darker green. The 850c I think had the blue remote connector.

Not sure is anyone brought this up but I just got a new 860C wit the 070 firmware and on startup it says 850C firmware. Just letting you know, it is not a big deal.