Recent content by doggydowg

I don't Evan understand how to use a multi meter I'm never going to figure this out, I've emailed grin but don't know what I'm doing. I've put out a wanted add for someone local to do if for money. Failing this I'll end up selling the whole bike and buying one that is more user friendly. I...

Hello all I've recently bought an ebike and bought a ca3 for it. The controller is a green time 24fet and has had cycle analyst plug fitted by previous owner. The throttle was wired direct into the greentime controller but I couldn't take advantage of all the perks of the ca3 so I've had my...

Hello all Finaly sold my 48volt ebike and bought what looks like a vector frame with mxus 45mmstator running 2000wh battery made up of zippys 25c 100volt with 80amp controller. Here is the item number to it on ebay hope this doesnt break the rules its not for sale this is the auction ive won...

Hello all two of my spokes have snapped on my ebike, can anyone advise what size spokes I need and where in the UK is best to get them? I have found some on the bay but there I think 165 and 170 bit close to be sure which one is mine? Thanks.

Hello all My 1000watt rear 9c hub kit has lasted 400miles all spokes were loose one is snapped off and i have a massive buckle so bad ive had to remove rear breaks which isnt safe. Can a normal bike shop get the buckle out or will it need lacing into a new rim? If im going to get it laced...

Thanks YKICK Small steps indeed sounds like I need to do an electrical course to build this battery lol, I can do basic soldering, but better then that my mates old man used to do small pcb board solering etc for a job I once got him to solder a bigger resistor in my ecu on a car to raise the...

Thanks for the replys so turnigy batterys is the way to go, that's good to know as that would have been about £2-300 wasted lol. Can I buy off the shelf bms for turnigy batterys, I have absolutely no idea about any of this stuff by the way I tried watching a video on how to build batterys and...

Thanks YKICK What is wrong with the batteries that were suggested to me out of intrest? I am looking at buying a crystalyte hs3540 a 70amp controller and getting a 72volt battery, the link that I posted above apparently all I have to do is buy 4 packs of them and connect red to black wire on...

Hi its 48volt motor, I am charging both ways so every 7.5 miles and according to my batery gauge which I know wont be that acuret I use between 1 out of 4 bars and 2. I can ride to and from work on one charge but probably am dangerously low on battery power. I was contemplating building a 2nd...

Thats good news that i can charge both ways and it wont decrease the life of the battery. if I wanted to run 30amps Or what ever my 1000watt motor will take what battery and budget for ready made should i be saving towards for when this battery gives up? My battery is 10ah and the seller said...

Hello all Ive recently built my first ebay ebike kit, the seller says the battery is - Samsung 2900mAh Cells - 12A Rated Current 1) its in a conceled black metal box, is it safe to open this box up and confirm the cells? 2)i was hoping to only charge once a day as i comute 7.5 miles each way...

Hello all I want to say a big thanks to all the members on here who have helped out over the past week or so dnmun, d8veh, friendly1uk, dogman dan, teslanv and any others ive left out ;-) ive finaly bought a 1000watt kit from ebay fitted it and now have a better way to get to work. The bike...

Hi Chalo I had an 8 speed shifter and 8 gears fitted to the bike not a 7 speed so I will need an 8 speed? Also ive run into problems, I want to use the regain breaks however I have hydraulic rear so cant use the rear and the front break leaver wont house the gear lever mechanism ffs ;-( so in...

Hello all I am in the process of fitting my 1000watt 48volt rear hub conversion onto a Carrera banshi, the bike came with shimmano 8 speed and a 3 speed crank. 1) I am assuming I will only be able to fit a 7 speed cassette in there now due to clearance issues 2) If I chose a 7 speed cassete...

The kit turned up but it has no freewheel/cassette , ive gone out and bought myself a bike tool kit and removed the cassette, bearings everywhere and I cant get the last bit off that has a thread and all the gears sit on to transfer to new hub ;-( What kind of cost should I be looking at paying...