Dui ni shuo de dui

fair enough,shame you dont have a press.

For a few reasons: -They aren't great to begin with, -I don't have sandblasting equipment ;-), doing this by hand would be insanely time...

Well, no it didn't evolve, unfortunately. Reason being that so far I haven't got the opportunity to find a decent price for making new...

I wa t to thank everyone found out my hub motor is shot

You weren't kidding Dui Ni, the opus can't test jack! All these cells were fully charged more than a year ago and shoved into a...

Ah sorry, I'm used to the 300A version of this BMS, I never tried the lower power ones. On the 300A the balancing current is 200mA...

Ok here is the update - I couldn’t stand being down not able to ride, so while I continue my search for a hub cover, in the mean time, I...

Update on the build. The new design of the battery case is the center portion is going to be printed and each side will have aluminum...

Well it was juste a mock-up to see fitment nothing spot welded yet. It does not show on picture but there is actually a plastic spacer...

Update Since I bought the frame on ebay It did not come with the subframe so I had to make one. I used the subframe from my 2021...

Yes, but it does it at the miserable pace of 50-60mA according to its datasheet. That is quite low, which means it will take a very long...

Okay so new options opened up because I looked through my stash of chargers- not good to know that I've hit that point of my hoarding...

Well that is the world of today. Everything gets forbidden for everyone if it bothers one or two c**ts who complain loudly enough...

Welding it isn't entirely impossible I suppose if you find some NASA welder guy, but I suggest you entirely forget it. It is a thin...

Yes and no. You need to worry to not go over whatever cell is rated at the lowest maximum voltage. Also, you need to make sure the cells...