Recent content by electrobent

Is that with the stock phase wires? I am at 30 and 80 now.

Yep, that was it. I did not know I was looking for "Halt V." I did not know what that was so I did not mess with it and instead overwrote it with the default 57 which was 1 volt more than I had at the time. After I told him I killed it, Edward sent me the complete spec that I had been asking...

I did not set out to change the LVC but now that you mention it, I bet that is what I did. Can you change just one thing or do they all get updated at once in the flash? I suspect the latter and that when I loaded the default file and failed to find an item labeled "LVC" to change, I ended up...

I bought the 12 X 4110 Controller from Lyen and it worked fine until I tried to program it. Its a real problem that the software does not let you retrieve the current settings. My motor no longer runs. Does anyone have an .ASV file for a 12 fet infineon and a Golden Motor 48V, 1000W motor...

I now have an EC-12411OLD Lyen Edition controller with the programming interface, 3 way switch, cruise control, and "CA" interface. I also have a new throttle which I also got from E. Lyen. I am assuming that "CA" means "Cycle Analyst"? I am running 48V now but have another 24s worth of good...

Thanks, Phil, I have placed an order with Edward.

http://kellycontroller.com/keb4822124v-48v-100a22kwe-bike-brushless-controller-regen-p-59.html • Support three modes of regenerative braking: brake switch regen, release throttle regen,0-5V analog signal variable regen. What is this 0=5V analog signal variable regen?

The infineon's look nice and seem to be reasonably priced (a Golden Motor controller shipped from China is $90) but they all seem to have long leads where I have long leads coming out of my GM wheel. Is the Infineon lead something special that I should solder into my hub or can I just chop them...

Hi: I fried my "cruise controller" from Golden Motor. As I have had for only 10 1/2 months, it should be under warranty but should Golden Motor fail to honor that, I am wondering what my options are. I have the 1000 watt 48V front hub motor with external controller. Are there other brands...

Folks: Golden motor has posted the software on their website for free download. They also have a picture that shows the cable and where the various colored wires go. While they want $50 for the cable, it looks like anybody with a pair of dykes and a soldering iron could make their own. Has...

Works great except for the fact that it is binary: all or nothing. It sure would be nice to have control of how hard it brakes. I have the Golden Motor cruise controller and the brakes slow the bike quickly to the point where the mechanical brakes can stop the bike easily and this was a...

Sorry, I did NOT end up with the Harbor Freight cells

Here is what I ended up with:

The attached picture shows what I ended up with--perhaps what Rick intended!

Thanks guys, I'll ponder the brake levers more closely. Maybe I can stick a magnet in the hole for the lead thingy? Or take that spoke magnet and unscrew the magnet from the rest of it and drill (and tap) a narrow deep hole instead of a short fat one? Or just get a momentary toggle switch and...