Recent content by filth

My speedo was behaving the same. It's broken. Ended using my old one from the bafang.

No, the connectors are definitely fine

Can you post a video from a cold start?

Two more questions on the HV80- will it handle 13S (54v fully charged) or is 12S really the max?

Yes, but put the prices aside. Edit: Do you have some links concerning the modifications? Edit2: Found it here: https://endless-sphere.com/forums/viewtopic.php?t=18792

Just a general question to add some understanding. I´ve used the BBSHD and the CYC, both have its own advantages with the stock controllers and both suffer from poor / lack of programming. The HV160 ESC seems to perform quite well with voltages <= 13S. So my question is: why are ESCs in...

Would you advice to use a different motor? Any suggestions which one?

Could you explain why and what typical reductions are?

Hi guys, i am planing to use the 3210 with the HV80 for a fully, riding 80% singletrails. If the setup works I would add a cycle analyst for pas / torque control. We want to use a belt to drive the chainring with 1 reduction. I need some input from experienced users thou. Questions: - We are...

I have connected via the bbshd tool, could read settings all fine. Changed Throttle input to "current" and Speed / Level to "Display commad". Clicked "write", nothing happened. Now connecting to the controller isnt possible anymore, in display there is error 30 "failed to communicate". Looks...

Has anyone used the KBS72151E controller? How is the Throttle response? Is it possible (and how) to wire a torque sensor with this controller? Thanks

First revision was with a BBSHD. We have built the battery compartment ourselfes. 14S6P with a 30A BMS. Ground clearance was awful so I had to switch to a X1.

Im riding the CYC X1 pro gen2. Overall that thing is ok, what I dont like compared to the BBSHD on the same bike and same battery (14S6P) is the startup (feels like the power ramp is slower on the CYC) and the torque response (I would like it to respond faster). Will the cycle analyst resolve...

Hi, i would like to compare the Castle Creations PHX Edge 40 HV to the stock controller on the CYC X1 Pro. I dont need more than 40A at the moment, dont need high speed, im riding mainly in the forest, so I need fast startup and high initial torque. How is the wiring on the controller? I have...

How does it perform compared to the stock controller?