Recent content by Fjp

Sorry I’ve posted a price.

I have moved to a trike so I’m selling, what I call, my Geezer Cruiser. It has a Crystalite 2000 watt DD motor, a Cycle Analyst and, an Allcell 48 volt/20ah battery (REALLY good battery and has been well cared for). I’m pretty sure it has a 40 amp controller. It’s a pedal forward bike, with a...

You guys are indispensable! Thank you for taking your time to help out, Frank

Thanks guys, I’m going to see what I can find that may do the job. I’m also thinking of swapping the 48volt horn for a 12 volt and installing a step down transformer (useful for other accessories too). Any idea if that may work? Cheers, Frank

Hi, I had a similar problem on 2 different occasions! The first time a throttle wire was partially cut through. The second time a connector was not completely seated. Best of luck, Frank

Hi Chalo, Thank you fir the response! I’m not sure what a choke is? Thank you, Frank

Hello Everyone, I recently completed a conversion on a Trident Trekker and directly wired a 48 volt car horn To a 48v 17.5 ah bafang battery. The led lights are also wired direct to the battery and work perfectly. The horn has an intermittent problem. On occasion, it will shut down the...

Your fork selection looks like a better set up than mine. Perhaps you won’t need to bend the crank arms to get clearance! I’m going to sell mine in the spring. I just built a trike .... my old body said it was time. I’ll be posting pics soon and thanking all who offered advise). Regards, F

Cold setting the frame seems like a good idea, if I can find a shop willing to do it. I like the idea of 2 more axle nuts. I should have asked if using all the spacers/nuts the axle is likely to bend or break? I’m an old 175 lbs so I don’t hot rod, “Anymore”, but I do ride mostly bumpy gravel...

Nope, not using regen. Thanks, Frank

The specs say it’s 170mm but I measure it closer to 160mm. Thank you, Frank

Pictures

Good Evening, I have mounted my hub motor and am concerned about the 17.5mm of spacing on each side of the axle (see pics below)! Will this cause any issues. Also, the axle is fully bedded into the dropout however, the nut is sticking below the dropout.... any issues with that? Lastly, the...

“Chalo”. I flunked typing! Frank

Great news. Thank you for taking the time Chalfont. Frank