glennb

“Right” except for having to manipulate LVC and shunt resistance. Fair enough though, I’d probably have done the same. Hope it works out...

I recall you using Votol controllers. Why not cough up fifty bucks for an EM-25?

Since you aren’t using disc brakes you don’t need to modify. If you had disc brakes, then filing the dropouts 1mm deeper will allow the...

I'll second what Chalo said above. And in this image, you show the axle installed the opposite way I'd recommend--you want the cable to...

Don't mess with the dropout slots. Use a torque arm or two, outside the dropouts. I prefer to drill and tap a hole in the dropout to...

Inanek, your method is unnecessarily risky. If you pull the brake lever firmly instead of feathering it, you won’t launch into traffic...

Thanks for the info! I realized shortly after I posted that I don't need to worry though, forgot for a sec that I'm local to Grin so...

It wasn’t necessarily poor junction between cable and terminal. There’s little by way of spring retention with bullet connectors...

No worries, good luck with it.

Yes, E-HP explains things better. You can quickly narrow the considered set by eliminating the motor wires, earth wires, and high...

You’re looking for 5v, earth, and one other. Neutral is rarely anything other than black, and easy to find - put your meter’s negative...

Fair enough. I couldn’t envisage it, so did an image search. Looks suitable with a kid. 2x adults seems obviously throttle only. Most of...

I like the mermaid diagram. Looks like useful software, worth checking out. It’s a short wheelbase step thru frame. Are you sure you...

I use AirTags. They’re great little gadgets. It’s just a pity that so many people are paranoid and disable the Find My feature.

Throttle’s easy to find. Just power it up and measure voltages on three pin connectors.