G
Reaction score
3

Latest activity Postings About

    • G
      goatman replied to the thread Bayliner Conversion.
      ya, i can pick up a 52hp isuzu off a guy at the marina with a velvet drive for $1000 but i would have to get a volvo penta bell housing...
    • G
      goatman replied to the thread Bayliner Conversion.
      no, i took it out, it sounded like i was going to break something, put the carbon fiber one back on and im bombing around with that one...
    • G
      goatman replied to the thread Bayliner Conversion.
      got the second coupling but its wonky also, mickey moused it and it might break in, doubt it but who knows probably chop 1/2 inch off...
    • G
      goatman replied to the thread Bayliner Conversion.
      alex sent me some data on the da95s but it seems wrong only 9.1 nm at 74.24 amps/5636rpm and 5350 watts
    • G
      goatman replied to the thread Bayliner Conversion.
      tried running the coupling at 160C but at 155C/5000 watts the motor started to run cooler, the temps started dropping quickly i remember...
    • G
      goatman replied to the thread Bayliner Conversion.
      ya but that guy looked like hippie, he was probably stoned while making the video
    • G
      goatman replied to the thread Bayliner Conversion.
      i doubt it lol
    • G
      goatman replied to the thread Bayliner Conversion.
      their website says 1% to 2% shrinkage when you print with plastics you have to allow for shrinkage i gambled and sent the file i used...
    • G
      goatman replied to the thread Bayliner Conversion.
      did a speed test with the 3 blade 9.25/12 3 blade prop at roughly 3kw continuous, its only 3.3 knots then ran the motor for 1hr25...
    • G
      goatman replied to the thread Bayliner Conversion.
      im done talking with them, see if they send me one i made the video public tonight did some prop testing with another nylon carbon...
    • G
      goatman replied to the thread Bayliner Conversion.
      got an email from Xometry today here it is "Binder jetting is tricky because we can only guarantee 1% tolerance on the bounding box of...
      • 1689739499409.png
    • G
      goatman replied to the thread Bayliner Conversion.
      theyre sending me a new one:) fingers crossed im just going to put this here,new tech hybrid engine https://innengine.com/our-technology/
    • G
      goatman replied to the thread Bayliner Conversion.
      i sent them this video to see what they say, its private unless i share the link
    • G
      goatman replied to the thread Bayliner Conversion.
      i was impressed until i put it on the z-axis is off by about 3/32 so it is unusable im going to call it The Leaning Tower of Xometry...
    • G
      goatman replied to the thread Bayliner Conversion.
      got my 3d printed metal shaft coupling today and im pretty impressed i sent them my file that i used for the ender and it specked right...
  • Loading…
  • Loading…
Top